768528
12
Zoom out
Zoom in
Previous page
1/159
Next page
1211 TODL next instruction TODL next instruction
EN
EN
Recline Adjustment
1 - Squeeze the recline adjustment button to adjust the enhanced child
restraint to the proper position. (19)
2 - Both rear facing mode and forward facing mode have 5 recline positions,
the recline angles are shown as. (20)
Rearward Facing Mode
(Child height 40cm-105cm/ Child weight 19kg)
Please install the enhanced child restraint on the rear vehicle seat, and
then place the child in the enhanced child restraint.
1 - Push the enhanced child restraint down onto the base (21). If the
enhanced child restraint is secure, the enhanced child restraint indicator
will show green. (22)
2 - To release the enhanced child restraint, first take the child out of the
child restraint. Squeeze the child restraint release button (23)-1, then lift
the child restraint up (23)-2.
The enhanced child restraint can ONLY be installed and released when in
rearward facing mode.
3 - Press and hold the ISOFIX adjustment button and push the enhanced
child restraint system back until it comes in contact with the vehicle
seatback. (24)
4 - Press and hold the rotation button to rotate for easier side loading/
unloading of the child, then rotate the seat to the rear facing position.
(25)
Press the rotation button on either side to rotate the enhanced child
restraint.
5 - Press the harness adjustment button while pulling the shoulder
harnesses to the desired length (Pull from below the fixed shoulder pads
to lengthen). (26)
6 - Unlock the buckle of the harnesses by pressing the red button. (27)
7 - Place the buckle tongues against the magnetic area on the outer side of
the enhanced child restraint so that the tongues are held in place. (28)
Use Infant Insert
8 - Place the child into the enhanced child restraint and pass both arms
through the harnesses.
9 - Engage the buckle. Please refer to (29).
10 - Rotate the enhanced child restraint to rearward facing. The enhanced
child restraint indicator will show green. (30)
11 - Pull down the adjustment webbing and adjust it to the proper length to
make sure your child is properly secured. (31)
Always keep child secured in harness and properly tightened by
removing any slack.
1
2
Remove the head support
portion of the infant insert
when the child’s
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant’s
shoulders no longer fit
comfortably.
Remove the infant insert
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
cushion can be used
separately without being
attached to the insert to
bolster the infant's back
for more comfort.
We recommend using
the full infant insert
while the baby is under
60cm and ≤13kg. It can be used
until they outgrow the insert.
The infant insert increases
side impact protection.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuna TodlNext at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuna TodlNext in the language / languages: All languages as an attachment in your email.

The manual is 10,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info