Manual Nuna REBL (page 14 of 84) (English, German, Dutch, French, Italian, Turkish, Spanish)

626286

Zoom out

Zoom in

1/84

23 24

2 Unlock the buckle of the harnesses by pressing the red button.

(19)

3 Fix the buckles on the both sides of seat to make placing the

baby more convenient. (20)

4 Use Infant Insert

Infant insert is for children’s protection.

(21)

5 Place the child into the child restraint and lock the buckle. Please

refer to. (22)

6 Tighten the shoulder harness straps by pulling the adjustment

webbing. (23)

Make sure the space between the child and the Shoulder

Harness Straps is about the thickness of one hand.

2 Rearward facing mode assembled as

(13)

The ISOFIX connectors must be attached and locked onto

the ISOFIX anchor points. (13)-1

The load leg must be installed correctly with green indicator.

(13)-2

Height Adjustment

for Head Support and Shoulder Harnesses

Check that Shoulder Harness Straps are set at the proper height.

Shoulder Harness Straps must be at a height nearest to your

childs shoulders (14), but not above the shoulder line. (15)

If the Shoulder Harness Straps are not at the proper height, the

child might be ejected the child restraint if there is a crash.

Squeeze the head support adjustment lever

(16), while pulling

up or down on the head support until it snaps into one of the 7

positions. The head support positions are shown as (17).

Securing Child

After the child is placed into the seat, check whether the Shoulder

Harness Straps are at proper height.

1 While pressing the adjustment button located at the front of the

child restraint, pull the two Shoulder Harness Straps of the child

restraint.

(18)

Detach the snaps on

the head support to

remove the head

portion of the insert.

We recommend

using the full infant

insert while the baby

is under 60 cm or

until they outgrow

the insert. The infant

insert increases side

impact protection.

Remove the head

support portion of

the infant insert

when the child’s

head no longer ﬁts

comfortably.

Remove the body

portion of the infant

insert when the

infant’s shoulders no

longer ﬁt comfortably.

The cushion can

be used separately

without being

attached to the

insert to bolster

the infant's back

for more comfort.

Remove the infant

insert cushion by

detaching the snaps

to allow more space

when the infant does

not ﬁt comfortably.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuna REBL in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 2,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuna REBL Manual

Product: