626286
13
Zoom out
Zoom in
Previous page
1/84
Next page
EN
EN
21 22
Installation with Base
Installation with ISOFIX System
1 Unfold the load leg from the storage compartment. (3)
2 Fit the ISOFIX guides into the ISOFIX anchor points. (4)
The ISOFIX guides can protect the surface of the vehicle seat
from being torn. They will also guide the ISOFIX connectors.
3 Press the ISOFIX release button on either side of the base, then
pull out the ISOFIX connectors.
(5)
There are 9 adjustable positions for ISOFIX. Press the ISOFIX
release button and push the base back against the vehicle
seat until tight.
4 Line up the ISOFIX connectors with the ISOFIX guides, and then
click both ISOFIX connectors into the ISOFIX anchor points.
(6)
Make sure that both ISOFIX connectors are securely attached
to their ISOFIX anchor points. There should be two audible
clicks and the colors of the indicators on the both ISOFIX
connectors should be completely green. (6) -1
Check to make sure the child restraint is securely installed by
pulling on the both ISOFIX connectors.
5 After placing the child restraint on the vehicle seat, extend the
load leg to floor.
(7), The load leg indicator will show green
when installed correctly, red means it is installed incorrectly. (7)
The load leg has 24 positions. When the load leg indicator
shows red this means the load leg is in the wrong position.
Make sure the load leg is secure by pressing down on
the front of the child restraint.
To shorten the load leg, squeeze the load leg release button
and pull the load leg upwards.
6 To remove the child restraint, pull the child restraint backwards
while squeezing the buttons on the ISOFIX connectors.
(8)
7 Press the ISOFIX release button to store the ISOFIX.
(9)
The completely assembled child restraint is shown as (10)
Recline Adjustment
Squeeze the recline adjustment button (11) -1, to adjust the child
restraint to the proper position. The recline angles are shown as
(11).
Please recheck the load leg position after reclining.
There are 7 recline angles for baby mode and 7 positions for toddler
mode.
Baby Mode
(Rearward Facing Mode)
Rearward Facing Child height 40cm-105cm/Child weight19.5kg
Recline position Position 1-7
1 Press the rotating button to rotate the seat facing the rear of the
vehicle.
(12)(13)
Please recline the seat to be in the 7
th
position for ease of
rotation.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuna REBL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuna REBL in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info