Manual Nuna PipaNext (page 14 of 177) (English, German, Dutch, French, Italian, Spanish)

768523

Zoom out

Zoom in

1/177

1413 PIPA next instructions PIPA next instructions

Securing Child

Use Infant Insert

After the child is placed into the seat, check whether the Shoulder Harness

Straps are at proper height.

1 - While pressing the harness adjustment button, pull completely the two

Shoulder Harness Straps of the enhanced child restraint. (22)

2 - Unlock the buckle of the harnesses by pressing the red button. (23)

3 - Place the child into the infant carrier module and lock the buckle. (25)

Please refer to (24).

4 - Tighten the shoulder harness straps by pulling the adjustment webbing.

(26)

Make sure the space between the child and the Shoulder Harness Straps

is about the thickness of one hand.

Canopy

1 - Unzip the zipper of the front canopy bow. (27)

2 - Pull the dream drape™ out of the canopy. (28)

3 - Attach the magnets on each corner to the front of the infant carrier

module with magnets. (29)

4 - The canopy window can be opened for ventilation. (30)

We recommend using the full

infant insert while the baby

is under 60 cm or until they

outgrow the infant insert. The

infant insert increases side

impact protection.

Remove the infant

insert when the infant’s

shouldersno longer fit

comfortably.

Detach & Assemble Soft Goods

see images (31)-(42)

To re-assemble the soft goods, reverse the aforementioned steps.

Installation without Base

1 - DO NOT install this infant carrier module on vehicle seats with Lap Belts.

(43)

2 - This infant carrier module is suitable for vehicle seats with a 3-point

Retractor Safety Belt (without base) only. (44)

3 - Place the infant carrier module onto the vehicle seat where you wish to

put it. Pull the vehicle safety belt out and lock it into the vehicle buckle,

sliding the vehicle lap belt into the side guides of the infant carrier

module. (45)

The infant carrier module can not be used if the vehicle safety belt buckle

(female buckle end) is too long to anchor the infant carrier module

securely. (45)-1

4 - Slide diagonal belt into the rear guide. (46)

5 - Pull the vehicle shoulder belt to fasten the infant carrier module tightly

and securely. (47)

6 - Level line on infant carrier module must be level to the ground when the

infant carrier module is installed. (48)

Tension the vehicle safety belt as much as possible, checking that it is

not loose or twisted.

After installing the infant carrier module, always check that the vehicle

belts are routed correctly and securely fastened into the vehicle buckle.

(49)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nuna PipaNext in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nuna PipaNext Manual

Product: