564495

Numatic ETB 1120 Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
14
ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED
PRIOR TO ANY MAINTENANCE OPERATION
! !
Remove the two hoses to disconnect the separator from the
machine (Fig 30).
Lift off the separator. The separator has a sealing-rubber
which should be examined at every clean-down (Fig 31).
Rinse using clean water.
Remove the lter tted into the separator and ush with clean water (Fig 32)(Fig 33).
Placed into the top tank is grey lter basket, clean and ush with clean water (g 34) (Fig 35).
Regular Maintenance
The Bottom (Clean Water) tank is attached to the chassis and should only
be removed by a competent service engineer (Fig 36).
Clean by ushing with clean water if required.
Excess water can be drained using the clear dump hose tted to the rear
of the machine.
Located under the left hand side is a clean water lter, ensure the clean
water tap is turned off before removing this lter (Fig 37).
Clean and ush with clean water if required.
Fig 30
Fig 31
Fig 32
Fig 33
Fig 36
Fig 37
Fig 34
Fig 35
Fig 37
After use, empty waste-water tank using emptying hose and
ush out with clean water (Fig.29).
The ETB Range has been designed with ease of use in mind,
this included easy stripping-down and cleaning.
Fig.29
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numatic ETB 1120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numatic ETB 1120 in the language / languages: English, French as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info