564495
13
Zoom out
Zoom in
Previous page
1/32
Next page
13
Brush overload.
The brush LED light will ash if the brush motor has been
overloaded (Fig.28).
Releasing the handle triggers will allow the machine to stop
and reset.
If the brush motor keeps overloading consider using a different type of brush.
Or move the transit wheels to obtain different brush pressures,
Heavy brush load decreases the available battery run time.
Setting the cleaning controls
Hi / Lo speed can only be toggled when the machine is in
STAND-BY MODE.
Water On / Off can only be toggled when in ACTIVE MODE.
Brush / Vac Switch can be cycled in both
STAND-BY and ACTIVE MODE.
Fig.28
To activate the machine from SLEEP MODE press either trigger
once.
Fig.27
When the triggers are released the brush motor and the cleaning solution pump will switch off, the vacuum motor will
continue for 10 seconds (this is to clear any uid residue in the hose).
The panel if unused will automatically enter SLEEP MODE after 60 seconds.
The ETB has been tted with a Hi - Lo mode, this reduces the noise produced by the
vacuum motor by 3dB.
To operate the Hi - Lo mode start the machine in the normal way.
When the machine is running normally the Hi Lo light will be illuminated blue, this means the
Vacuum motor is running at 100%.
With the machine running press the Hi Lo button once the Vacuum motor will reduce speed
to 75% of capacity and the Hi lo light will not illuminate.
STAND-BY
Stage 1. Brush and Vac
Stage 2. Brush only
Stage 3. Vac only
ACTIVE
Stage 1. Brush and Vac
Stage 2. Brush
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numatic ETB 1120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numatic ETB 1120 in the language / languages: English, French as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info