Manual Numatic ETB 1120 (page 10 of 32) (English, French)

564495

Zoom out

Zoom in

1/32

ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED

BEFORE MAKING ANY ADJUSTMENTS

Fitting the brushes

Featuring the Nulock brush system.

The brush is simply pushed and twisted to lock, making tting and removal a simple process.

The Pad is retained using Numatic’s own PadLoc system. (Ask your supplier for details)

Only use manufacturer supplied brushes / pads.

ETB 1120 requires a 20’’ brush or pad

Fitting and lowering the Floor Tool

The oor tool has been designed for quick tting, allowing easy squeegee blade replacement.

Raise the oor tool for transit or

lower for cleaning operation using

the lifting handle tted to the back

of the machine (Fig 20).

We are now ready to set the

controls to suit the cleaning

conditions.

Before any settings can be

applied, ensure the brush deck is

lowered.

Safety gloves are recommended for the changing of used brushes.

Note:

It is easier to t the oor-tool if the weight of the machine is resting on the brush. Ensure the brush is tted rst.

Machine Set-Up

Fit the brush /pad to the drive chuck,

twist to lock the brush

(Fig 14) / pad in place (Fig 15).

Tipping the Brush Deck

To tip the deck into the down position

(Operating mode) Press in the brush

deck locking bar (Fig 16) and rotate the

brush deck (Fig 17).

To change to brush deck up position,

(Transit mode) simply lift the deck and

the sprung loaded locking bar will active

to hold the deck up.

Fig 15

Fig 17

Fig 20

Fig 19

Fig 18

Fig 16

Fig 14

Fit the oor tool and retain using

the detent Pin (Fig 18).

The lifting strap is held by a

detent pin (Fig 19).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic ETB 1120 in the language / languages: English, French as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic ETB 1120 Manual

Product: