Manual Numatic ETB 1120 (page 8 of 32) (English, French)

564495

Zoom out

Zoom in

1/32

Using the handle position lever

(Fig 1), move the handle into the

upright position. (Fig 2).

PLEASE READ BEFORE COMMENCING ANY OPERATION.

After the removal of all the packaging, carefully open and check the contents.

Ensure the Batteries are charged before use.

Fit the isolator key and switch the machine on (Fig 7).

Fig 1

Quick Set-Up Guide

Fig 3

Place the top tank (waste water) into the machine (Fig 5) and connect the

vacuum and oor tool hose to the separator (Fig 6).

Fig 5

Fill the bottom tank (Clean Water) from a tap or hose pipe using the Flexi-Fill pipe tted to

the ller cap (Fig 8). Add Non foaming cleaning uid as required (See page 11).

The ETB 1120 has a water capacity of 11 gal

Fig 2

Fig 4

Fig 6

Fig 7

Fig 8

Note:

Great care must be taken to ensure that contaminants

(leaves, hair, dirt, etc.) are not allowed to enter the

clean-water tank during the lling process.

If using a bucket or similar, ensure it is always clean

and free from debris.

Connect 24V power supply to

the machine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numatic ETB 1120 in the language / languages: English, French as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numatic ETB 1120 Manual

Product: