Manual Numark 5000FX (page 8 of 48) (English, German, French, Italian, Spanish)

23414

Zoom out

Zoom in

1/48

beat via the Beatkeeper™. BPM2

should be assigned to the sampler.

This is explained in the BPM 2 section.

When BPM2 isn't selected, then Smart

Loop will simply truncate the length of

the sample to the nearest beat but will

not attempt to synchronize the sample

to the other source.

14. FX MIX/SAMPLER LEVEL: This fader

controls the mix between the source

audio and the FX audio. When using

the sampler, this fader controls the

volume of the sampler output. If you

choose to process the sampler, this

slider adjusts volume of the sampler.

All effects will be 100% wet.

15. SAMPLER CROSSFADER ASSIGN:

This assigns the sampler to one side of

the crossfader. You can use the Fader

Start button with this switch to trigger

the sampler when the crossfader is

moved.

16. REVERSE: This plays the audio from

the selected channel in reverse. The

audio plays from a memory buffer and

will stop when the memory runs out.

Bleep will temporarily reverse the audio

until released. When the sampler is

playing, this control will reverse play of

the sampler.

EFFECTS DESCRIPTIONS

Note: All effect mix levels are adjusted by the position of the wet/dry fader when used with

Channel 1 thru Master, except BPM2. When used with the Sampler, all effects are 100% wet.

• SCRATCH

: Creates a real-time scratch

effect, just like a needle on a record, using

the audio buffer

Wheel: Scratches the source music

forward and backwards. Push forward to

release the scratch with the music.

Scratch releases when you push off going

forward or when the wheel movement

stops.

Toggle: No Function

Display 2: No Function

• SONAR

: Creates a unique “swoosh”

effect.

Wheel: Moving the wheel clockwise

initiates the effect. Moving the wheel

counter-clockwise removes the effect.

Toggle: No Function

Display 2: The level of this effect is

shown in the right parameter display and

LED indicator.

• BPM 2

: This is used to view the tempos

for two sources. Use the LED indicator to

assist in matching the beats. This uses

Numark’s patented Beatkeeper®

technology. If both SMART LOOP and

BPM2 and either the effect or the BPM2

channel is the sampler, the sampler will

synchronize to the other channel selected.

If BPM2 is on the sample, the sampler

syncs by using normal pitch bend. If the

FX is on the sample, the sampler syncs by

using pitch bend with key lock. In this

situation, looping the sample will start it

synchronized to the beat of the other

source but single mode will not be

synchronized.

Display 1 (Left): Shows the BPM 1 (Beats

Per Minute) of the source selected for

processing.

Display 2: Shows the BPM of the second

source (BPM 2) and the channel selected.

Toggle: Selects the channel for BPM 2

assignment

TAP Button: This button is used to adjust

the BPM and reset the downbeat.

Calculation of the BPM is automatic with

the internal processing.

• Tapping this button once will

reset the downbeat to when the

tap occurs.

• Tapping the button with the

beat, resets both the BPM

manually and the downbeat.

• Holding the Tap Button for a few

seconds causes the processor to

automatically recalculate the

BPM.

LED Indicator: Shows BPM 1 on the

left, BPM 2 on the right, and Interlock

in the middle. When Beats are aligned,

the Interlock buttons will illuminate.

Wheel: No Function

Note: If you need to reset and calculate

BPM1, turn off the BPM 2 effect, reset,

then turn it back on.

• CHOP

: This FX is used to mute

sections of the audio synchronized to

BPM 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark 5000FX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark 5000FX Manual

Product: