Manual Numark 5000FX (page 7 of 48) (English, German, French, Italian, Spanish)

23414

Zoom out

Zoom in

1/48

EFFECTS CONTROLS

1. Parameter Display (Left): This display

shows the BPM (Beats Per Minute) of the

source selected for processing.

2. TAP Button: This button is used adjust

the BPM and reset the downbeat.

Calculation of the BPM is done

automatically by the internal processor.

• Tapping this button once will reset

the downbeat to when the tap

occurs.

• Tapping the button with the beat

resets both the BPM and the

downbeat.

• Holding the Tap Button for a few

seconds causes the processor to

automatically recalculate the BPM.

3. Parameter Display (Right): This

display shows the effect value or the

secondary BPM.

4. Shift Toggle: Used to adjust

parameters of effects (see FX

Descriptions).

5. Effect Selection: The 5000FX has 8

effects and two Beatkeepers™. These

are described in the FX Description

section.

6. LED Indicator: This displays a quick

visual reference for parameters used in

the FX and beat alignment of the

Beatkeeper™.

7. Wheel: The wheel controls the effects

and can be used as a scratch wheel.

How the wheel can be used for each

effect is detailed in the FX Description

section.

8. CUE FX: This button sends the FX or

sampler output to the headphone cue.

This can be used to preview to the

effect 100% wet.

9. SAMPLER FX: This button allows the

sampler audio to be processed by the

FX processor.

10. RECORD: To record a sample, select

your source with the FX/Sampler

buttons. Press once to record. Press a

second time to stop the recording.

11. PLAY SINGLE: Pressing Play will

trigger the sample playback (even if the

recording has not been stopped). The

audio will only play as long as the play

button is held. Play is stopped upon

release of the button.

12. LOOP: Pressing Loop will play the

sample and repeat until the Loop button

is pressed again.

While a loop is playing, you can spin

the wheel to temporarily “bend” the

pitch. This way you can manually

adjust to other beats in your mix. If

you depress the Sampler FX button and

select the Pitch effect, you can make a

permanent change to the pitch.

You can also cut your loops in half.

Press the SAMPLER FX button to set the

FX to the sampler. Then use the

“SHIFT” toggle to adjust the length of

the sample. The length of the sample

is shown in the Right Parameter

Display.

13. SMART LOOP: This button activates

the Smart Loop mode in the sampler.

When recording or playing back a loop,

the looped sample will be synced to the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark 5000FX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark 5000FX Manual

Product: