817964
3
Zoom out
Zoom in
Previous page
1/14
Next page
1. Introduction
The MQTT API offers the possibility to connect supported Nuki products to an MQTT server
in order to allow basic control of them, similar to the functionality available via the Bridge
HTTP-API such as retrieving the current lock state and performing lock operations.
Supported product is currently only the Smart Lock 3.0 Pro.
Check for the latest version of this document at our Developer Platform.
2. Provisioning & API Activation
2.1 Fixed Credentials in Firmware 3.5.11
If the Smart Lock 3.0 Pro runs firmware 3.5.11 and if the debug mode of the Smart Lock is
enabled, a connection to a hardcoded MQTT server will be automatically established using
the following login credentials:
Server: mqtt.local (mDNS) or mqtt (DNS).The Smart Lock first tries to resolve mqtt.local via
mDNS. If this does not work, it tries to resolve mqtt via DNS. Connection attempts are made
twice per hour and immediately after every successful WiFi reconnect.
Port: 1883
Username: nuki
Password: SHA256 hash of the WiFi Password stored in the Smart Lock WiFi settings. The
SHA256 hash has to be lowercase.
Example:
WIFI Password = 1234567890
SHA256 = c775e7b757ede630cd0aa1113bd102661ab38829ca52a6422ab782862f268646
Source: https://emn178.github.io/online-tools/sha256.html
Remarks for the fixed credentials implementation:
How to enable Debug mode:
Tap 7x on the Settings > Features & Configuration > “NUKI SMART LOCK” headline.
After enabling debug mode, it can take up to one minute until the Smart Lock
Nuki Home Solutions GmbH
Münzgrabenstraße 92/4 • 8010 Graz • Austria • F +43 316 22 84 12 50
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuki MQTT API at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuki MQTT API in the language / languages: English as an attachment in your email.

The manual is 0.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info