803280
17
Zoom out
Zoom in
Previous page
1/86
Next page
15
Warning!
Bottles are very hot immediately
after being sterilized and should
only be removed using bottle
tongs
13
enclosed.
12.Use bottle tongs
13
to remove the baby
feeding bottles and the accessories
(Fig.
H
).
13.To finish sterilizing prematurely, switch
off the appliance at On/off switch
10
.
14.To stow mains cable
12
, disconnect the
plug and push the mains cable back into
cable compartment
11
.
3.3 Please observe the
following:
With a quantity of 110 ml water, the
appliance needs about 6 minutes for
heating up and another 6 minutes for
sterilization.
Sterilization is only guaranteed if the
process is not interrupted and the time is
not reduced.
If the lid remains closed after
sterilization, the contents remain
germfree for up to 24 hours.
You should use only normal tap water
without added chemicals.
Ensure that the equipment is descaled
on a regular basis in accordance with
“4.2 Descaling” to ensure the sterilizer
continues to function correctly.
4. Cleaning and care of the equipment
4.1 Cleaning
Warning!
To prevent the risk of an
electric shock, injury or damage:
Always detach the plug before
cleaning the appliance.
Only ever clean the appliance
once it has cooled down.
Never immerse evaporation
tray
6
in water.
Caution!
Under no circumstances use
scouring agents or corrosive or abrasive
cleaning materials, as these could damage
the appliance.
1. Take cover
2
and drainer
9
with
accessories basket
4
and rods
5
off
evaporation tray
6
.
2. Wipe down evaporation tray
6
with a
damp
cloth after every use.
3. Clean cover
2
, accessories basket
4
,
drainer
9
and rods
5
by washing up by
hand or in a dishwasher.
4.2 Descaling
After some time, the boiling process will
cause limescale to form in evaporation
tray
6
of the steam sterilizer (this will
depend on the hardness area of the tap
water being used).
Caution!
Do not use commercially-
available descalers, pure acetic acid or
vinegar essence.
1. To get rid of limescale, we recommend
pouring 55 ml of white vinegar and 55 ml
of boiling water into the steam sterilizer
and leaving it to take effect for 30 min.
N.B.:
longer periods will not improve
descaling but may damage the
appliance in the long term.
2. After this time, empty the sterilizer, rinse
out twice with clean water and wipe dry.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk 10749099 3PIN Vario Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk 10749099 3PIN Vario Express in the language / languages: English, German, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info