803280

Nuk 10749099 3PIN Vario Express Manual

16
Zoom out
Zoom in
Previous page
1/86
Next page
14
3. Sterilization of feeding bottles, teats
and accessories
3.1 General information on
sterilizing
Newborn babies do not initially have
sufficient antibodies to be able to protect
themselves from pathogenic germs.
For this reason it is vital that sterilized teats
and bottles are used when preparing infant
feeds.
Even tiny feed residues left on teats and
bottles can easily lead to bacterial
contamination (microbial growth).
The steam sterilizer works by the hot-
sterilizing method. Water is converted into
steam. The humid heat generated therefore
sterilizes the components inside the
sterilizer swiftly and reliably. This way the
teats and feeding bottles only come into
contact with hot steam.
At the same time, the small amount of
water the steam sterilizer needs for steriliz-
ing means that only a little power is
required.
3.2 Sterilization
Caution!
All component parts being
sterilized must be washed thoroughly and
be free of any food residues.
1. Take cover
2
and drainer
9
with
accessories basket
4
and rods
5
off
evaporation tray
6
(Fig.
A
).
2. Use a measuring beaker or a baby feeding
bottle to put 110 ml of fresh tap water in
evaporation tray
6
(Fig.
B
).
3. Put in drainer
9
(Fig.
C
).
4. Put in either accessories basket
4
and
4 rods
5
or 6 rods and no accessories
basket (Fig.
C
).
The rods can be removed by gently
squeezing the two retaining tabs to
release them.
5. Up-end the bottles over the rods with the
opening facing downwards, so that the
bottles are freely suspended (Fig.
D
).
Caution!
Always sterilize the bottles open
and dismantled into their individual parts,
otherwise material deformation may occur.
6. Put the accessories in accessories
basket
4
(Fig.
D
).
7. Put on cover
2
(Fig.
E
).
8. Take the desired amount of mains
cable
12
out of cable compartment
11
and insert the plug in a suitable power
supply socket (Fig.
F
).
9. Switch on the appliance at On/off
switch
10
(Fig.
F
).
Note:
If indicator light
7
is already on, start
switch
8
has already been pressed
accidentally.
10.Start sterilization by pressing start
switch
8
(Fig.
G
).
Indicator light
7
turnes on.
The steam sterilizer switches to standby
automatically once sterilization is complete.
The indicator light goes out.
Warning!
During the sterilizing process and
immediately after switching off,
there is still hot steam in the
appliance, some escaping from
steam vent
1
, so take care not to
scald yourself. Do not reach
across steam vent
1
! Allow the
appliance to cool down for at least
3 minutes before opening it.
Caution!
Switch off the appliance at On/off
switch
10
after every sterilization process.
This stops sterilization being started
accidentally.
11.Take off cover
2
. Always use handle
3
to
do this.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nuk 10749099 3PIN Vario Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nuk 10749099 3PIN Vario Express in the language / languages: English, German, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info