Manual NRX EVO 500EH (page 3 of 11) (English)

520224

Zoom out

Zoom in

1/11

1. INSTALLATION

1.1 Telephone Connection

•

other end to the socket located in the bottom of the phone.

Replace the handset to the cradle.

NOTE: You will need to remove the wall mount

bracket to access this socket.

•Connect the small plug (RJ-11) of the telephone line

cord to the socket at the back of the unit and the other plug

to the telephone socket at the wall.

NOTE: If the RJ-11 to RJ-11 line cord is used, please

ensure that the Blue plug is connected to the wall socket.

• Connect the AC adaptor into a standard 220-240VAC

mains socket and the power socket at the back of the NRX

EVO 500EH.

• The display will show 00-00-00. After about 4 seconds

the display will show TOTAL:00 NEW:00

• If you have subscribed to a Caller ID Service, the time

Connect one end of the coil cord to the handset and the

Installation & Telephone Set-Up

and date will be automatically updated when the first

call is received. Otherwise, it is necessary to set the time

and date manually, please refer to the Telephone Setup

Menu.

•

In case of power failure or accidental unplugging of the

AC adaptor, the built-in EEPROM will retain all the

telephone's memory including phone book and CID

records.

1.2 Connecting A Wireless Headset

The NRX EVO 500EH has an electronic hookswitch

interface, located at the rear of the telephone. This

allows wireless headset products from Plantronics, GN

Netcom (Jabra) and Sennheiser to be connected to the

telephone and control the line without the need for a

handset lifter product.

· Plantronics

Using the Plantronic cable supplied with the NRX EVO

500EH, plug the round plug into the 'Handset Lifter'

port located at the bottom of your Plantronics headset

base and the RJ45 plug into the 'E.H.S' port on the back

of the telephone.

Telephone Set-Up

Connect the 'Telephone Cable Port' on the headset base

to one of the headset ports located on the left side of the

telephone using the cable provided with your headset

product.

For operation of your Plantronics headset, please refer

to the user guide that was supplied with the product.

The NRX EVO 500EH replicates the operation of the

handset lifter allowing control of a phone call by the

'Call Control Button' located on the headset.

You can also control the headset with the

'Speaker/Headset' button on the telephone. i.e If you

have answered an incoming call using the 'Call Control

Button' on the headset, you can press the

'Speaker/Headset' button on the telephone to end the

call and turn off the headset.

· GN Netcom (Jabra)

Using the GN cable supplied with the NRX EVO

500EH, plug the end with a white band close to the

plastic plug into the 'RHL/AUX' port located at the

bottom of your GN headset base and other end plugs

into the 'E.H.S' port on the back of the telephone.

Connect the 'Telephone Port' on the headset base to one

of the headset ports located on the left side of the

telephone using the cable provided with your headset

product.

NOTE: If your GN headset model has multiple

hookswitch modes, please ensure the base is set to 'GN

RHL' - Refer to the user guide supplied with your headset.

The NRX EVO 500EH replicates the operation of the

handset lifter allowing control of a phone call by the 'Talk

Button' located on the headset. Once the line has been

seized by the headset, the 'Speaker/Headset' button on the

telephone is disabled until the call is completed by

pressing the 'Talk Button' on the headset again.

· Sennheiser

To connect a Sennheiser wireless headset to the NRX

EVO 500EH, the Sennheiser TCI-01 connection box is

required.

Connect the TCI-01 to the Sennheiser headset base with

the cable supplied using the DW Com port, then connect

to the telephone using the GN cable supplied with the

phone. The end with a white band close to the plastic plug

connects to the 'HL1 port' on the TCI-01 and other end

plugs into the 'E.H.S' port on the back of the telephone.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NRX EVO 500EH in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NRX EVO 500EH Manual

Product: