741773
70
Zoom out
Zoom in
Previous page
1/74
Next page
– 70 –

Do NOT put the uppermost glass of the tower into
the dishwasher. This may cause scratches in the
glass; it may also damage the coating on the base.
Wipe the surface with a damp cloth. (the same is
true for the hob glass).
Turn the glass a quarter of a turn to the right to be able to
remove the glass from the tower. The 2 metal grease filters can
now be pushed up from the tower. If desired, the entire tower
including grease filters can also be cleaned in the dishwasher.
The filter can be cleaned as follows:
In the dishwasher

INFO: Clean the grease filters using a standard
dishwashing programme at low temperature.
By hand: Immerse the filter in a mixture of boiling water and
grease-cutting dishwashing liquid. Use warm water to rinse
the filter under the tap, then leave it to dry.

WARNING: If the instructions described above are
not followed, residue in the filter may cause a fire.
After cleaning:
Place the filters and the glass back onto the tower.
Place the tower back into the opening.
Press the button
and hold for 2 seconds.
Press the
key for three seconds.
9.4 Cleaning the recirculation filter
(only with recirculation)
If recirculation has been selected, the device has been
connected to an built-in recirculation box with a recirculation
filter which can be regenerated.

Follow the cleaning instructions described in the
recirculation box / filter manual.
After cleaning:
Return the recirculation filter into the built-in exhaust box.
Press the control key
for 3 seconds.
10 TROUBLESHOOTING MINOR
FAULTS
10.1 Messages on the hob
Code
there is no cooking pan on the cooking zone
the cooking pan is not suitable for induction
the diameter of the bottom of the cooking pan
is too small when compared to the cooking
zone
U
See Chapter 4.3.9 Keep warm
E
The electronic system is disrupted.
Disconnect and reconnect the hob.
Call the after-sales service
I I
See Chapter 4.3.7 Stop & Go
(Er03)
The controller keys are covered by liquid or an
item. The symbol will disappear as soon as the
keys are released or cleaned.
E2
The hob has overheated, leave to cool, then
switch back on.
E8
The fan air supply is blocked.
Unblock it.
U400
The hob has not been properly connected to the
network. Check the connection.
(Er47) Problem in the device's internal bus system.
If one of these error messages remains visible, you can contact
the after-sales service.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 1801 One Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 1801 One Power in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Novy 1801 One Power

Novy 1801 One Power Installation Guide - English, German, Dutch, French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info