Manual Novoferm NovoPort 2016 (page 16 of 134) (All languages)

709124

Zoom out

Zoom in

1/134

• General Information

• Safety advice

Before commencing any work on the product,

carefully read through the Operating Instructions

from start to finish, in particular the section entitled

"Safety" and the related safety advice. It is important

for you to have fully understood what you have read.

This product could prove hazardous if not used

properly as directed or in accordance with the

regulations.

Any damage occurring as a result of non-compliance

with these instructions shall exempt the

manufacturer from all liability.

• Explanation of the symbols

WARNING: imminent danger

This symbol indicates that instructions are

being given which, if not observed, could

lead to malfunctions and/or failure of the

operator.

WARNING! Danger by electric current

The works may only be executed by an

electrician.

This symbol indicates that instructions are

being given which, if not observed, could

lead to malfunctions and / or failure of the

operator.

Reference to text and figure

• Occupational safety

By following the safety advice and instructions

provided in this Operating Manual, injury to persons

and damage to property whilst carrying out work on

the product can be avoided.

Failure to observe the safety advice and instructions

provided in this Operating Manual as well as the

accident prevention regulations and general safety

regulations applicable to the range of use shall

exempt the manufacturer or its authorized

representative from all liability and render any

damage claims null and void.

• Hazards that can result from this product

The product has undergone a risk assessment. The

design and execution of the product based on this

corresponds to state-of-the-art technology.

When used properly in accordance with the

regulations, the product is reliable and safe to

operate. Nevertheless, a residual risk always

remains.

The product runs at a high voltage. Before

commencing any work on electrical systems, please

observe the following:

1. Disconnect from the power supply

2. Safeguard against a power restart

3. Establish that electricity supply is cut off

• Spare parts

Only use the manufacturer’s genuine spare

parts. Wrong or faulty spare parts can

cause damage, malfunctions or even a

total failure of the product.

• Changes and modifications to the product

To prevent hazards and ensure optimum

performance the product may not be subjected to

any changes, modifications or conversions that have

not been expressly approved by the manufacturer.

• Dismantling

Dismantling takes place in reverse sequence to the

Installation Instructions 13 - 1.

• Disposal

Observe the corresponding country-specific

regulations.

• Data plate

The data plate is located on the side of the motor

head. Observe the specified power rating.

• Packaging

Always dispose of the packaging materials in an

environmentally-sound manner and in accordance

with the local regulations on disposal.

• Terms of warranty

Dear Customer,

During production the garage door operator you

have purchased has undergone various checks by

the manufacturer to ensure that it is of perfect quality

and free from defects. Should this operator or part of

it prove to be of no or limited use as a result of proven

material or manufacturing defects, we shall rectify

this, at our discretion, by means of a free-of-charge

repair or replacement.

We shall not accept any liability for damage as a

result of unsatisfactory fitting and installation,

unsound putting into service, incorrect operation and

maintenance, excessive use or overloading as well

as any alterations or modifications carried out to the

operator and accessory parts by the customer. The

same shall also apply for damage incurred during

transit or as a result of force majeure, external

influences or natural wear as well as special

atmospheric stresses. We cannot accept any liability

following alterations or modifications of functional

parts carried out by the customer. We must be

notified of any defects immediately in writing; on

request, the parts in question shall be sent to us. We

shall not bear the costs for dismantling and

installation, freight and carriage. If a complaint is

proven to be unjustified, the customer must bear our

costs.

This warranty is only valid in conjunction with the

signed invoice and commences on the day of

delivery. The manufacturer guarantees that the

product is free from defects.

The warranty is granted for a period of 24 months, in

as far as the verification overleaf has been properly

filled out. Otherwise the warranty shall expire 27

months after the date of manufacture.

• Technical data

Operator type: NovoPort III

Control: FUTURE III NP

Operating mode: Impulse operation, remote-

controlled

Pull forces: Fn = 165N, Fmax = 550N

Power rating: 230V / 50Hz

Power input:

stand-by modus: 0,5W

max. operation: 200W

Short-time duty: 2 min.

Lighting: 1,6W LED

External lighting: max. 500W

Safety category according to EN 13849-1:

Input STOPA: cat 2 / Plv = C

Input STOPB: cat 2 / Plv = C

Temperature range: - 20°C - +60°C

For dry rooms only.

Manufacturer: Novoferm tormatic GmbH

Eisenhüttenweg 6

D-44145 Dortmund

www.tormatic.de

Table of Contents

• General Information

- Safety advice

- Explanation of symbols

- Occupational safety

- Hazards that can result from this product

- Spare parts

- Changes and modifications to the product

- Dismantling

- Disposal

- Data plate

- Packaging

- Terms of warranty

- Technical data

• Installation Instructions

• Operating Instructions

• Maintenance and Checks

• Trouble-shooting Guide

• Diagnostic Display

• Inspection Log Book

- Inspection and Test Log Book of the Door

System

- Check List of the Door System

- Proof of Inspection and Maintenance of the

Door System

- EC Declaration of Conformity

Retain these installation, operating and maintenance instructions for the full duration of the operator’s service life!

WN 903010-55-6-50 04/16

door open once by remote control after than stop with function Submitted on 28-6-2023 at 10:56
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Novoferm NovoPort 2016 in the language / languages: All languages as an attachment in your email.

The manual is 9,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Novoferm NovoPort 2016 Manual

Product: