541264
8
Zoom out
Zoom in
Previous page
1/19
Next page
Camden User Guide V7
Copyright 2013 novero. All rights reserved.
_
__
_ After pairing is successful, the headset and the mobile phone will remember
each other, and there will be no need to re-pair next time.
_
__
_ Every time the headset is turned on, it will automatically connect to the last
connected device. If you want to pair it with other devices, please turn off the
Bluetooth function of your last connected devices first and pair the headset
with the new device according to steps 1 to 6 mentioned above.
Multipoint
Multipoint Multipoint
Multipoint
pairing with 2 HFP devices
pairing with 2 HFP devicespairing with 2 HFP devices
pairing with 2 HFP devices
The headset can be connected with two active Bluetooth devices simultaneously. If you
want to use multi-pairing, please refer to the following steps:
1. Firstly, pair the headset with your first device.
2. Make sure the headset has been connected to the first phone. By pressing ( 3
seconds) “Volume –“ you will re-enter the pairing mode again. When the blue and
the red LED blinks alternately you can pair the second device. Now your second
device is connected and your first phone is just paired. Then you can re-connect the
first device again from your phone. When the headset is powered on the next time it
will connect to both devices automatically.
Note
NoteNote
Note _
__
_ After successful multi-pairing, the paired devices will remember each other.
Unless the pairing information is deleted because of new pairings, there is no
need to pair next time. If the pairing information is deleted, please re-do all
steps again.
_
__
_ Voice dial and re-dial will always work with the last used device
last used devicelast used device
last used device. While having
a phone call the second device is disconnected. It will automatically re-pair
after the call again.
_
__
_ Please don’t stream music or take phone calls while pairing the second device
as this will cause interference sounds. First pair all devices you like to use –
then start streaming.
Multi
MultiMulti
Multi-
--
-call scenario
call scenariocall scenario
call scenario
When the first phone (main phone) is in an active call and another call comes in
from the second phone which is also connected with the Bluetooth headset, press
volume+ about 3 seconds, you will take the call from the second phone and hold on
the main device call. Press “volume +” for 3 seconds and you will toggle back to the
other call. Short press on the multifunction key will end the active call, and then it
switches to the held call. Another short press on the MFB will end the call.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novero Camden at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novero Camden in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info