541264
7
Zoom out
Zoom in
Previous page
1/19
Next page
Camden User Guide V7
Copyright 2013 novero. All rights reserved.
4.4
4.44.4
4.4 Pairing
Pairing Pairing
Pairing Camden
CamdenCamden
Camden
with
with with
with Bluetooth devices
Bluetooth devicesBluetooth devices
Bluetooth devices
Prior to using your Camden, you have to pair it with a Bluetooth-enabled device, e.g.
your mobile phone, music player or PC/laptop.
How to enter pairing mode
How to enter pairing modeHow to enter pairing mode
How to enter pairing mode?
??
?
Function
FunctionFunction
Function
Operation
OperationOperation
Operation
LED indicator
LED indicatorLED indicator
LED indicator
Indication tone
Indication toneIndication tone
Indication tone
Entering
pairing
mode
Ensure
the headset is turned
off, and then press and hold
MFB
MFBMFB
MFB button for 5 to 7 seconds
until LED flashes red and blue
alternately
LED flashes red and
blue alternately
Two short “
beep
tones or “Paired”
voice command
Entering
pairing
mode for
second
device
Ensu
re the headset is turned
on and paired with the first
device . Press “Volume – “ for
3 seconds until the LED
flashes red and blue
alternately
LED flashes red and
blue alternately
-
check device
display for status
Note
NoteNote
Note Pairing mode will last 2 minutes. If the headset still cannot pair with any
Bluetooth device after 2 minutes, it will automatically return to standby mode in
order to save power.
Pairing the headset with a Bluetooth
Pairing the headset with a Bluetooth Pairing the headset with a Bluetooth
Pairing the headset with a Bluetooth enabled mobile phone
enabled mobile phoneenabled mobile phone
enabled mobile phone
The pairing procedures are specific for different mobile phone models and brands. Please
refer to your mobile phone’s user manual for further information. The general pairing
procedure is as follows:
1. Make sure the mobile phone and the headset are within Bluetooth range (i.e. not
more than 10 meter apart).
2. Enter the headset’s pairing mode (please refer to chapter 4.4 “How to enter pairing
mode?”);
3. Activate your mobile phone’s Bluetooth function and set your mobile phone to
search for Bluetooth devices. After the search is completed, select the “novero
Camden” from the Bluetooth device list.
4. According to the indication on your device, enter password or PIN No. ”0000” and
press “yes” or “confirm” if requested. (not needed from Bluetooth 2.1 onwards)
5. After successful pairing, select “Camden” in the Bluetooth device list and press
“connect”.
6. After successfully connecting, the blue LED flashes twice quickly every 5 seconds.
Note
NoteNote
Note _
__
_ If pairing fails, please turn off the headset first and then re-pair according to
steps 1 to 6 mentioned above.
_
__
_ If the Bluetooth version of your mobile phone is V2.1 or above, there is no
need to enter the pairing password when the headset pairs with your mobile
phone.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novero Camden at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novero Camden in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info