64738
54
Zoom out
Zoom in
Previous page
1/57
Next page
IP8540 User Guide
49
The phone software has restarted in an unusable state. Power cycle the phone.
I am trying to login for the first time and I do not see the PIN option.
Contact your IT Help and check:
ü Ensure PIN is enabled on OCS (pool level->FrontEnd Properties->VoIP tab).
I am trying to configure fingerprint, but the phone does not seems to recognize my swipes.
Click Use Pin Configurationon menu bar and click Use finger print Configurationon menu
bar. Now, try finger swipe again.
If on repeated tries it still does not work, see Unexpected behavior section below.
I used my fingerprint as the unlock mechanism, but on every attempt my finger swipe is not being
recognized. My phone is locked and I am stuck.
Try to do a full-length clean finger print swipe slow and easy.
Repeat above step few times and if it still does not recognize your finger swipe, then use small
recessed button in the wiring cavity. The recess button is located between USB and headset
connectors. Use a small (non-metallic) point to press the button. This will take you back to the
factory defaults.
How can I restore my device to factory defaults?
A small recessed button is located in the wiring cavity between USB and headset connectors.
Use a small (non-metallic) point to press the button. This will take you back to the factory
default
On device boot-up, calibration screen shows press enter to accept. I do not see enter on the phone.
Use Selectbutton in the center of the Scroll wheel in lieu of Enter.
My screen calibration seems off and I cannot click anything on the screen.
Recalibrate the touch screen. Tap Calibrate Touch Screen in the Settings menu to recalibrate
the screen.
5.2 Placing Calls
When I press the Help button or the Setting button there is no response.
Contact your IT Help and check:
ü Ensure you are signed into OCS service.
As soon as I call <xyz>, it shows call as active and hold.
In the active call display, Hold is a softkey. Tapping the Hold softkey places the connected
party on hold.
Before I complete my dialing, the call is initiated with invalid number.
See Unexpected Behavior later in this section.
Contact your IT Help and check
ü Most probably dialing plan has overlapping rules causing one rule to override other.
Remove overlap rules or reconfigure dial plan to remove any conflicts.
I called someone but there is no speech path.
Tap Hold and then tap the call in the active call list and see if speech path is recreated.
See Unexpected Behavior later in this section.
Contact your IT Help and check:
ü Are you traversing firewall? If so, make sure MRAS has been configured correctly.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nortel IP Phone 8540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nortel IP Phone 8540 in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info