669966

NordicTrack Grand Tour - NTEX71015 Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23
HOW TO USE AN ONBOARD WORKOUT
1. Touch the screen or begin pedaling to activate
the console.
See HOW TO TURN ON THE POWER on
page 19.
2. Select the main menu.
See step 2 on page 21.
3. Select an onboard workout.
To select an onboard workout, first touch the cyclist
button at the bottom of the screen. The workouts
menu will appear on the screen.
Select the desired workout category from the work-
outs menu and then select the desired workout.
Note: It may be necessary to scroll the screen to
view all the menu options.
The screen will show the name, the estimated
duration, and the distance of the workout. The
screen will also show the approximate number of
calories you will burn during the workout and a map
of the workout. Note: You may be able to select
other variables for the workout on this screen.
4. Start the workout.
Touch the Start Workout button to start the workout.
The workout may have a warm-up segment. To
skip the warm-up segment, touch the Skip button.
To select warm-up segment options for the exer-
cise bike, see step 15 on page 28.
Each workout is divided into segments. One
resistance level, one incline level, and one tar-
get cadence (speed) are programmed for each
segment.
During the workout, the profiles will show your
progress. To view the profiles, flick or slide the
screen.
During some workouts, the screen will show a map
of the route and a marker indicating your prog-
ress. Touch the buttons on the screen to select the
desired map options.
As you exercise, keep your pedaling speed near
the target cadence for the current segment. The
target zone meter will prompt you to increase,
decrease, or maintain your pedaling speed. To
view the target zone meter, flick or slide the screen.
Note: The target cadence is displayed in revolu-
tions per minute (rpm).
IMPORTANT: The target cadence is intended
only to provide motivation. Your actual pedaling
speed may be slower than the target cadence.
Make sure to pedal at a speed that is comfort-
able for you.
If the resistance level and/or incline level for the
current segment is too high or too low, you can
manually override the setting by pressing the
Resistance buttons or the Incline buttons. If you
press a Resistance button, you can then manu-
ally control the resistance level (see step 3 on page
21). If you press an Incline button, you can
then manually control the incline level (see step
4 on page 21). To return to the programmed
resistance and/or incline settings of the work-
out, touch the Follow Workout button.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors,
such as your weight. In addition, if you manu-
ally change the resistance level or incline level
during the workout, the number of calories you
burn will be affected.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NordicTrack Grand Tour - NTEX71015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NordicTrack Grand Tour - NTEX71015 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info