296277
45
Zoom out
Zoom in
Previous page
1/56
Next page
Model 9000/9100/9500
45
General Service Hints
Problem: Softener delivers hard water
PROBLEM CAUSE CORRECTION
8. Softener fails to draw brine. A. Drain line flow control is plugged.
B. Injector is plugged.
C. Injector screen plugged.
D. Line pressure is too low.
E. Internal Control Leak
A. Clean drain line flow control.
B. Clean injector.
C. Clean screen.
D. Increase line pressure to
25 psi min.
E. Change seals, spacers and piston
assembly.
9. Control cycles continuously. A. Broken or shorted switch. A. Determine if switch or timer is
faulty and replace it, or replace
complete power head.
10.Drain flows continuously. A. Valve is not programming correctly.
B. Foreign material in control.
C. Internal control leak.
A. Check timer program and positioning
of control. Replace power head
assembly if not positioning properly.
B. Remove power head assembly and
inspect bore, remove foreign
material and check control in various
regeneration positions.
C. Replace seals and piston assembly.
PROBLEM CAUSE CORRECTION
Softener delivers hard water. Reserve capacity has been exceeded. Check salt dosage requirements and
reset program wheel to provide addi-
tional reserve.
Program wheel is not rotating with
meter output.
Pull cable out of meter cover and rotate
manually. Program wheel must move
without binding and cycle actuator must
start the cycle before the clutch
releases.
Meter is not measuring flow. Check output by observing rotation of
small gear on front of timer
(Note: Program wheel must not be
against regeneration stop for this check)
Each tooth is approximately 75 gallons
on 1-1/2installations. If not performing
properly, replace meter.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 9500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9500 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9500

Nokia 9500 User Manual - Dutch - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info