Manual Nokia 9000i (page 34 of 126) (English)

297910

Zoom out

Zoom in

1/126

4-6 Telephone settings

interface is on and within cellular coverage area.

While a data/fax connection is active (check the

call status indicator), you cannot make calls.

If you want to make a voice call, you can either

wait until the data/fax call ends, or you can ter-

minate the data/fax call by starting to make a

call normally. When you press Call, you will be

asked if you want to terminate the data call.

Press Terminate to confirm.

Telephone settings

Press Settings in the Telephone main view to

open a list of several settings groups:

Ringing settings, Voice call diverting, Voice call

barring, Voice call waiting, Calling card settings,

Single number settings, Other settings.

To change the settings:

1 Select a group and press Change to open it.

2 Select a setting and press Change. The cur-

rent value of the setting is displayed after the

setting name, unless the setting is one the

network services: call diverting, barring or

waiting. See the following sections.

Ringing settings

All sounds — Sets the incoming call alert and all

other alarms to Ring, Beep, Silent or Silent for.

Silent for lets you set the length of time you

want the silent mode to be active. You may

want to use this setting in order not to forget

to turn the ringing tone back on after a meet-

ing, for example. Enter the time in the format

hh:mm.

When sounds are set to Beep, Silent or Silent

for, the call status indicator shows the text

SILENT. This setting affects both interfaces.

Whatever the chosen setting, an incoming

call is always indicated by a note.

Ringing volume — Adjusts the ringing volume (1

is the lowest, 5 the highest).

Ringing tone — Determines the ringing tone. To

compose your own ringing tones, go to the Extras

application and start the Composer. For more in-

formation about composing, see chapter 11 "Ex-

tras: Composer" on page 11-5.

Changing the settings of

network services

The network services call diverting, call barring

and call waiting, may not be supported by all op-

erators, or you may have to subscribe to them.

Information about the status of these services is

stored in the network. Therefore, the current set-

tings are not shown until you request the infor-

mation from the network by pressing Get status.

While the communicator is making a request to

the network, a query note is shown on the dis-

play. After a successful request, the new status

now appears on the settings list.

When a divert is active and you make a call, a

text is shown on the phone interface display, re-

minding you that your incoming calls will be di-

verted to another phone number. The text will

appear only if your network operator supports

this feature.

To cancel all call diverts or barrings, press Cancel

call diverts or Cancel call barrings.

Voice call diverting

The voice call diverting network service allows

you to direct your incoming voice calls to anoth-

er phone number (fax diverting is activated via

the Fax application’s settings).

The network will store the number to which your

calls are diverted, even if you cancel the diverts.

Choose a divert mode:

Divert all calls — All incoming calls are diverted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9000i in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9000i

Nokia 9000i User Manual - German - 150 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nokia 9000i Manual

Product: