Manual Nokia 9000i (page 33 of 126) (English)

297910

Zoom out

Zoom in

1/126

Chapter 4 - Telephone 4-5

Note: The transfer operation can be made only if

you have one held call and one active call;

all calls are voice calls (fax or data calls

cannot be transferred); and none of the

calls is a conference call.

There are two ways to transfer voice calls from

the phone interface:

1. Press 4 followed by , or

2. Press and hold the Menu key for a second.

Choose the Transfer option in the menu and

press OK, or press Quit to cancel.

Calls can also be transferred from the communi-

cator interface. When you have one call on hold

and another call active, press Call commands

and choose the option Transfer call. Press OK.

Answering a waiting call

Call waiting is a network service which must be

activated before you can use it (see ”Telephone

settings” on page 4-6).

When Call waiting is active, and you receive a

new call while you already have an active voice

call, you will see a note informing you of this.

A waiting call is answered, like any call, by se-

lecting the waiting call and pressing Answer. The

previous call will be put on hold.

Sending DTMF tones

The Dual Tone Multi Frequency (DTMF) tones al-

low you to communicate with voice mailboxes,

computerised telephony systems, etc. Besides the

numbers 0 - 9, you can also use the characters p,

w, * and # (for information on the functions of

these characters, see chapter 3 "Contacts: Con-

tact cards - Storing DTMF tones" on page 3-3).

To send a DTMF sequence when you have an ac-

tive call:

1 Key the digits from the communicator inter-

face keyboard. Each keystroke will generate a

DTMF tone which will be transmitted directly.

Or alternatively,

1 Press Send DTMF. A list of stored DTMF se-

quences is shown (for information on how to

store DTMF sequences, see chapter 3 "Con-

tacts: Contact cards - Storing DTMF tones" on

page 3-3).

2 Select a DTMF sequence. You can edit the se-

quence, or, if there are no stored sequences,

you can enter the DTMF string manually into

the field.

3 Press Send to send the DTMF sequence shown

in the input field, at the bottom of the display.

Note: You cannot access the DTMF view during

a conference call. However, you can send

DTMF tones during a conference call by

entering the digits from the keyboard.

Alternating calls

Alternating calls can be made to a fax box, for

example: you initiate the call as a voice call, but

it changes into a fax call when your fax box

starts to send you your faxes.

To make alternating calls you need to add a spe-

cial Tel/Fax field to the contact cards of the re-

cipients of your alternating calls (see chapter 3

"Contacts: Contact cards - Customising contact

cards" on page 3-2).

You can also change the mode of the call from

voice to fax manually by pressing Change mode.

Alternating calls cannot be put on hold or incor-

porated into a conference call.

Incoming faxes, short messages and data

Faxes, short messages and incoming data are re-

ceived automatically, provided that the phone

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9000i in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9000i

Nokia 9000i User Manual - German - 150 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nokia 9000i Manual

Product: