29440
18
Zoom out
Zoom in
Previous page
1/38
Next page
GB 18
Channel search
The Channel search procedure can be carried out in five different ways.
The menu will look different depending on what option you selected in the
“Antenna/satellite selection” menu.
If you selected “One antenna/one LNB configuration”, select “Automatic”,
“Manual” or “Advanced Manual” search, or “Use predefined channels”.
If you selected “Multisatellite/DiSEqC switch configuration” or “Motor an-
tenna configuration” you also indicate which satellite you wish to search from,
using the cursor left/cursor right button.
Automatic search/Automatic search for free channels
If you selected “One antenna/one LNB configuration” or “Multisatellite/
DiSEqC switch configuration”:
•Press select to start searching for channels.
If you selected “Motor antenna configuration”:
Select a predefined channel and then adjust the motor (if necessary) us-
ing the cursor left/cursor right button.
•Press select to start searching for channels.
Manual search
The information that must be entered in this menu is available in satellite TV
magazines or on the Internet.
Transponder frequency: Specify the frequency in MHz using the numeric
buttons. If you enter the wrong value, erase using cursor left.
Polarisation: Select Horizontal, Vertical, Circular left or Circular right.
Symbol rate: Enter using the numeric buttons. If you enter the wrong value,
erase using cursor left.
Network search: Select “Yes” if you want to search all transponders that are
connected to a specific network.
Adjust motor: This alternative is only visible if you have set the motor an-
tenna configuration. If necessary, adjust the motor for the current satellite.
•Press select to start searching for channels.
Video, Audio and PCR PID
These alternatives are only available if you are searching from a user-defined
satellite. By entering these values you can see a TV picture on the screen
which may help you to adjust the dish.
Remove limits
If you need to remove the limits.
When you activate this command, the motor will turn itself to the 0° (Zero) posi-
tion.
However, the next time you select a channel, the motor will turn to its proper
position.
First time installation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 150S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 150S in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 150S

Nokia 150S User Manual - German - 38 pages

Nokia 150S User Manual - French - 42 pages

Nokia 150S User Manual - Italian - 37 pages

Nokia 150S User Manual - Swedish - 38 pages

Nokia 150S User Manual - Spanish - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info