29440
16
Zoom out
Zoom in
Previous page
1/38
Next page
GB 16
Typical connection of a two-way DiSEqC switch:
Connect the cable from the LNB that is intended for channels from the
ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the
switch.
Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connec-
tor marked LNB 2 (B).
Then, connect the antenna cable to the connector marked OUT on the
switch.
Connect the other end of this cable to the ANTENNA input at the rear of
the Mediamaster.
For each LNB that you connect to the DiSEqC switch, the following
configuration has to be carried out.
As an example, the following section will describe how the LNB intended
for ASTRA will be configured for DiSEqC input 1 (A) on the switch and the LNB
intended for HOTBIRD will be configured for DiSEqC input 2 (B).
Switch port
Select the input for each LNB that will be connected. In this example, the
DiSEqC 1 input is selected first.
LNB type
Select the correct LNB type for your configuration, e.g. “Universal”.
LNB Offset voltage
If the cable from any of the LNB’s is very long, it might be necessary to in-
crease the voltage to these LNB’s by 0.5 V.
In most cases nothing needs to be altered here. Leave the default value as
“0 V”. If the switch does not change between horizontal and vertical polari-
sation, the voltage to an LNB can be increased later. Increase the voltage if
an LNB does not change polarisation.
Satellite
In this example, select ASTRA because its LNB is connected to the DiSEqC
1 input on the switch.
Predefined channel
Select one of the predefined channels and adjust the antenna until a TV pic-
ture from the predefined channel is visible on the screen.
•Press opt to view the predefined channel.
Repeat this procedure for the second DiSEqC port, but this time select 2 from
“Switch port” and HOTBIRD as the satellite.
When the configuration of both DiSEqC ports has been completed, press se-
lect. A confirmation that the DiSEqC ports have been configured will show
up. You can now start searching for channels.
•Press select to carry out the channel search procedure.
Please refer to the “Channel search” section on page 19.
First time installation
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 150S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 150S in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 150S

Nokia 150S User Manual - German - 38 pages

Nokia 150S User Manual - French - 42 pages

Nokia 150S User Manual - Italian - 37 pages

Nokia 150S User Manual - Swedish - 38 pages

Nokia 150S User Manual - Spanish - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info