774464
21
Zoom out
Zoom in
Previous page
1/38
Next page
Turn the rotary to “BEVERAGES RECIPES’’. Press the rotary.
Turn the rotary to “CAPPUCCINO’’. Press the rotary.
Turn the rotary to “LIVE PROGRAMMING’’.
Place a cup or glass underneath the outlet (picture 5).
Information: Should you wish to cancel the Live programming after the start, hold the rotary down for
longer than three seconds.
To change the standard setting press the rotary for longer than three seconds.
The display shows “SELECT STRENGTH’’.The display shows “SELECT STRENGTH’’.
Turn the rotary to select the strength of your choice. Weaker to the left and stronger to the right.
Press the rotary to conrm the choice of your strength.
The display shows “SELECT FLAVOUR’’.
Turn the rotary to select the avour of your choice (for explanation of the avour proles see
point3.3).
Press the rotary to conrm your choice of avour.
The display shows “PLEASE PLACE CUP UNDERNEATH COFFEE OUTLET’’.
Place a cup or a glass underneath the coffee outlet.
The display shows “PLEASE WAIT’’. The device is grinding, heating and will then start with the
preparation.
First, the coffee is prepared.
The display shows “STOP COFFEE?’
Press the rotary when the desired amount of coffee is prepared.
Information: If you only want to prepare milk froth (without coffee) , so turn the rotary to
“SETTINGS”, “BEVERAGE RECIPES”, “MILK FROTH” and proceed as described in the following steps.
After the coffee part of the Cappuccino is prepared, the display shows “PLEASE PLACE CUP
UNDERNEATH MILK FROTHER’’.
Place the cup underneath the milk frother (picture 1/P)
Warning: Ensure that the tap of the spumatore is upright. This is how the frothed up milk is created.
The display shows “OPEN VENT’’.
Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.
Warning: First, water comes out off the spumatore, then the milk froth.
The display shows “STOP MILK FROTH?’
Press the rotary when the desired amount of milk froth is prepared.
The display shows “CLOSE VENT’
Close the steam- hot water - rotary knob anticlockwise.
Information: Wait for the last milk drops before you remove the cup.
The standard setting for CAPPUCCINO is now changed and saved. The display shows “RECIPE
CREATED’’ for a short amount of time and returns to the main menu with the new standard settings.
4.3.2. Manual programming for Cappuccino and milk froth
You can also change the standard setting manually as follows.
Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing
the rotary.
19
4. Prepare coffee specialities
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona NICR670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona NICR670 in the language / languages: English as an attachment in your email.

The manual is 7.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona NICR670

Nivona NICR670 User Manual - German - 38 pages

Nivona NICR670 User Manual - Dutch - 38 pages

Nivona NICR670 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info