774464
20
Zoom out
Zoom in
Previous page
1/38
Next page
You can prepare milk directly from the pack or from a different container with the special milk frother
and ll directly into the cup or into the glass.
Connect the suction tube to the milk frother (picture 10).
Connect the other end of the suction tube to the milk container (designs 670 and 680 only)
(picture8) or submerge it directly into the milk carton or into a different container.
Warning: Ensure that the tap of the spumatore is upright. This is how the frothed up milk is created.
Turn the rotary to “CAPPUCCINO’’.
Information: The display shows the current settings in the lower row. The strength is shown on the left,
the avour prole in the middle and the amount of milk froth on the right.
Press the rotary.
The display shows “PLEASE PLACE CUP UNDERNEATH THE MILK FROTHER’’. Simultaneously the
device is grinding the coffee already.
Place the cup underneath the milk forther (picture 1/P)
Information: By ashing of the strength in the lower row of the display it is shown that you can now
change this parameter by turning the rotary.
While the bean symbol is ashing for the strength, turn the rotary to adjust the strength.
Clockwise stronger and anticlockwise weaker.
The appliance is heating. Then, the display shows “OPEN VENT’’.
Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.
Information: The display shows the current settings in the lower row. The strength is shown on the left,
the avour prole in the middle and the amount of milk froth on the right.
Information: By ashing of the amount of milk froth in the lower row of the display it is shown that you
can now change this parameter.
While the ml-display for the milk froth is ashing, turn the rotary to change the amount of milk
froth. Clockwise stronger and anticlockwise weaker.
As soon as the desired amount of milk froth is prepared, the display shows “CLOSE VENT’’.
Turn the steam-hot water - rotary knob (picture 1/C) anticlockwise to the 0-setting.
“Please turn the Steam/Hot Water Tap (Illustration 1/C) clockwise to the Zero Position at the latest,
when enough milk has been drawn.”
The display shows “PLEASE PLACE CUP UNDERNEATH COFFEE OUTLET’’.
Now, place a cup or a glass underneath the coffee outlet (picture 5).
Information: By ashing of the amount of coffee in the lower row of the display it is shown that you can
now change this parameter.
While the ml-display is ashing for the amount, turn the rotary to adjust the amount. Clockwise
stronger and anticlockwise weaker.
You can change the standard setting in two ways as follows:
4.3.1. Live programming for Cappuccino and milk froth ( designs 670, 675 and 680 only)
You can change and save the standard setting during the preparation as follows.
Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing
the rotary.
18
4. Prepare coffee specialities
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona NICR670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona NICR670 in the language / languages: English as an attachment in your email.

The manual is 7.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona NICR670

Nivona NICR670 User Manual - German - 38 pages

Nivona NICR670 User Manual - Dutch - 38 pages

Nivona NICR670 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info