Turn the rotary control to your choice of preparation. In the setting MILK COFFEE the milk/
milk froth is prepared rst, then the coffee. The setting COFFEE MILK starts with the coffee.
In the setting MILK + COFFEE both are prepared simultaneously.
Tip: Try the different ways of preparation to nd your personal favourite.
Press the rotary control to conrm the setting.
Select coffee quantity (Cappuccino, Caffè Latte and Latte Macchiato)
Turn the rotary control to “COFFEE QUANTITY” and press it.
Turn the rotary control to select the quantity of your choice. Press the rotary control to conrm
your choice.
Note: Make sure that your cups or glasses t.
Select milk quantity (Caffè Latte, Latte Macchiato, Warm Milk and Hot Milk)
Turn the rotary control to “MILK QUANTITY” and press it.
Turn the rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select froth quantity (Cappuccino, Latte Macchiato, Milk Froth)
Turn the rotary control to “FROTH QUANTITY” and press it.
Turn the rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select total quantity (all drinks with milk)
Note: By changing this setting all previous settings will be adjusted accordingly.
Turn the rotary control to “TOTAL QUANTITY” and press it.
Turn the rotary control to the quantity of your choice. Press the rotary control to conrm your
setting.
Note: Make sure that your cups or glasses t.
Select temperature (if “TEMPERATURE”, “COFFEE” and/or “MILK”, see 3.4. “INDIVIDUAL”, is set in
the menu “SETTINGS”)
Turn the rotary control to “TEMP. COFFEE” and press it.
Turn the rotary control to the temperature of your choice (STANDARD, HIGH, MAXIMUM) and
press it to conrm the setting.
Turn the rotary control to “TEMP. MILK” and press it.
Turn the rotary control to the temperature of your choice (STANDARD, HIGH, MAXIMUM) and
press it to conrm the setting.
To exit a menu level turn the rotary control in each level to “EXIT”. Then press the rotary control
or touch EXIT.
Repeat this until you are back in the main menu.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
4.4. Adjusting standard settings for hot water (e.g. tea)
Ex-factory the standard setting for hot water is: 150ml.
The display shows: “150ml”
Place a cup underneath the spout (g. 5).
Turn the rotary control to “HOT WATER” and press it or touch the hot water symbol.
Press the rotary control or touch START.
The cup light switches on. The appliance prepares hot water in the standard setting.
The standard setting can be altered in two different ways:
4.4.1. Live Programmierung
You can change and save the standard setting during the brewing process as follows.
Turn the rotary control in the main menu to “SETTINGS” and then press it or touch the settings
symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to “HOT Water” and press it.
Turn the rotary control to “LIVE PROGRAMMING”.
To change the standard setting now press the rotary control or touch START.
The display shows “PLEASE WAIT”. The appliance heats up and will start the preparation.
The display shows “STOP HOT WATER?”
Press the rotary control when the required quantity of hot water is reached.
The standard setting has now been altered and saved. The display shows “RECIPE SAVED” for a
short time and will then switch back to the main menu with the new standard settings.
4.4.2. Manual programming
You can also change the standard setting manually as follows.
Turn the rotary control in the main menu to “SETTINGS” and press it or touch the settings symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to “HOT WATER” and press it.
Select water quantity
Turn the rotary control to “HOT WATER QUANTITY” and press it.
Turn the rotary control to select the quantity of your choice (from 50ml to 500ml). Press the
rotary control to conrm the setting.
Note: Make sure that your cups/glasses t.
Select temperature (if “TEMPERATURE” “HOT WATER”, see 3.4. “INDIVIDUAL”, is set in the menu
“SETTINGS”)
Turn the rotary control to “TEMP. HOT WATER” and press it.
Turn the rotary control to the temperature of your choice (STANDARD, HIGH, MAXIMUM) and
press to conrm the setting.
To exit a menu level turn the rotary control to “EXIT” in each level and then press it or touch EXIT.
Repeat until main menu appears.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
4.5. “My coffee” for me and others according to taste
Your appliance allows you to prepare a coffee for up to 20 persons or drinks according to taste.
Ex-factory only one drink is programmed with the standard setting for “MY COFFEE”: Volume per cup
120ml, strength standard, aroma prole “DYNAMIC”, 1 cup.
The display shows “120ml ooo l”.
You can also change the standard setting manually as follows.
Turn the rotary control in the main menu to “SETTINGS” and press it or touch the settings symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to “MY COFFEE” and press it.
You can now alter an existing recipe or create a new one.
4.5.1. Adjust recipe
Turn the rotary control to “EDIT” and press it.
90 91
4. Preparing coffee specialities 4. Preparing coffee specialities
