673082

Ninja BL450 series - Nutri Ninja Pro Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
11
www.ninjakitchen.com
English
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja
™
cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
4 Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal.
(Fig. 1)
5 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
(Fig. 2)
6 Press down on the top of the cup in short intervals to
activate. (Fig. 3)
Use
7 When you have reached your desired consistency, stop
the appliance by removing your hand from the cup. Wait
for the motor to stop running. Pull straight up to remove.
(Fig. 4)
8 Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly counterclockwise. (Fig. 5)
9 Do not store blended contents with the Pro Extractor
Blade Assembly attached.
10 Place the spout lid onto the cup, twist to seal and enjoy!
11 For storage, only use spout lid lid to cover.
12 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
13 Make sure that the motor base is unplugged when not in
use.
For best results, use short “PULSES”!
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not
store ingredients before or after blending in the Nutri Ninja cup with the blade assembly attached. Some
foods may contain active ingredients or release gases which will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup,
only use spout lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY PULSE REMOVAL
Fig. 2 Fig. 3
Fig. 4Fig. 1 Fig. 5
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ninja BL450 series - Nutri Ninja Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ninja BL450 series - Nutri Ninja Pro in the language / languages: English, French as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info