586824
47
Zoom out
Zoom in
Previous page
1/89
Next page
45Original Instructions
6 Operating instructions Supreme 150 / Performer 150 / Supreme 250 /
Performer 250 / Supreme LCD
1
2
Fig. 19
On/o
hose
Manual
hose
6.1 Starting the machine
The control current outlet (low voltage) is connected to a
control current lead running the length of the pipes. Both
ends of the low-voltage lead should be connected to the
connection panel on the vacuum unit. One lead to each
outlet.
The central vacuum cleaner’s power cable must be
connected to a 230 volt mains socket. The appliance is
double-insulated and does not need to be earthed.
Start/stop button
All models have a start/stop button on the front to start
and stop the power unit, Fig. 18. The start/stop button can
also be used when/if you want to use a Nil sk utility inlet
to vacuum direct from the machine (if you do not have a
Nil sk hose with remote control) or for testing and demos.
Manual hose
The vacuum cleaner starts and stops automatically. When
the vacuum hose is connected to a vacuum socket, a
metal ring on the end of the hose closes the control circuit
and the vacuum cleaner starts up. Fig. 19. When the hose
is removed from the vacuum socket, the vacuum cleaner
stops.
On/O hose
Some models have an hose with remote control (on/
o function) for the vacuum cleaner. The hose for these
5.4 Utility inlet (Standard accessory in
Canada)
If you need an extra inlet on the machine, you can attach
the utility inlet directly to the inlet on the vacuum cleaner
and attach the exible hose to the utility inlet.
The utility inlet can be used with both Manual, On/o and
Wireless hoses. Just connect the vacuum hose to the inlet
and push the on/o button on the cleaner to start vacuum
cleaning.
If the lid is not fully closed when detaching the hose, it will
automatically close next time the cleaner is started.
models are to be connected as shown in Fig. 19. NOTE!
The plate at the hose inlet must be turned upwards, so
that the hose inlet will be locked to the wall inlet by the
two notches at the wall inlet.
Wireless handle
If you use a hose with a wireless handle, you can start
and stop the vacuum cleaner using the switch on the
handle, Fig. 20. Wireless handles have also the feature of
adjusting the suction power of the cleaner, using buttons
at the hose handle.
6.2 Servicing
Always unplug the power cable before doing any service
work! If suction is poor, it indicates that the ow of air
through the machine is restricted. This may be due to the
following:
The dust bag is full and should be replaced.
The lter is clogged and should be cleaned of dust.
Thermal protector
The vacuum cleaner has a thermal cut-out that trips if the
vacuum cleaner becomes overheated.
Supreme 150 / Performer 150 / Supreme 250 /
Performer 250
If this happens - unplug the main power cord to reset the
vacuum cleaner. Wait 5-10 minutes to allow the machine
to cool down. While you are waiting, check the hose, dust
bag and lter to be sure that nothing is blocking the ow
of air through the machine. The vacuum cleaner should
now start again. If the cut-out trips again, you need to get
a service rm to remedy the fault.
Supreme LCD
When the overheat symbol in the display on the cleaner is
activated (models with display) the cleaners’ thermal cut-
out has tripped. For more information regarding thermal
cut out, see Overheat indicator.
Fig. 20
Wireless Deluxe
Fig. 18
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Supreme LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme LCD in the language / languages: Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme LCD

Nilfisk Supreme LCD User Manual - English - 26 pages

Nilfisk Supreme LCD User Manual - German - 27 pages

Nilfisk Supreme LCD User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info