586824
46
Zoom out
Zoom in
Previous page
1/89
Next page
44 Originlal Instructions
5 Vacuum unit Supreme 150 / Performer 150 / Supreme 250 / Performer 250 /
Supreme LCD assembly instructions
5.1 Fitting the wall bracket
Plan the positioning of the wall bracket so that there is
plenty of space above and below the area where the
vacuum unit is to be located. Make sure there is a mini-
mum of 200 mm free space below the dust container.
Mark the positions for all four screw holes with a pen or
similar. The diameter of the holes in the holder is 5 mm.
Select screws and, if necessary, wall plugs suitable for the
type of wall concerned. Drill the four screw holes.
Fit the wall bracket with the large opening pointing
downwards, see Fig. 15. Then screw the holder rmly into
place.
5.2 Locating the vacuum cleaner on
the wall bracket
To facilitate the procedure, rst remove the dust container.
Free the container by pulling both handles outwards.
Then remove the container from the machine.
To mount
the vacuum cleaner/motor chassis to the wall bracket - just
lower the chassis downwards so that the locking device of
the bracket will pass through the slot of the chassis
Fig. 16.
Make sure the corresponding bracket on the machine is
held rmly in place by the wall bracket.
When removing the motor chassis from the wall bracket -
push the locking device towards you so it will release the
chassis and then lift the chassis up from bracket.
5.3 Connecting the machine
The machine is connected with the exible suction hose
in the lower position and the exhaust pipe uppermost, Fig
17. The exible hose is connected to the dust inlet at the
container of the cleaner.
Push the hose in to the inlet at the
cleaner until the hose locks. Press the button on the hose
inlet downwards in order to remove the suction hose.
The
exible suction hose acts as an adapter connecting the
vacuum unit with the pipe system.
NB! These connections must not be glued in case the
unit is handed in for service.
Position the central vacuum cleaner so that the exhaust
pipe can be kept as short as possible, maximum. 5 me-
tres. Take the surroundings into consideration when posi-
tioning the exhaust. For this reason, you should always t
a mu er.
For additional information concerning the assembly
and installation of the pipe system and low-current
lead, please refer to the separate assembly instructions
supplied with the pipe package.
Push the hose in to the inlet at the cleaner until the hose locks.
Press the button on the hose inlet downwards in order to remove
the suction hose.
Exhaust
Inlet
Fig. 17
Fig. 15
Fig. 16
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Supreme LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme LCD in the language / languages: Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme LCD

Nilfisk Supreme LCD User Manual - English - 26 pages

Nilfisk Supreme LCD User Manual - German - 27 pages

Nilfisk Supreme LCD User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info