Turn the machine OFF at the power switch, before changing the brushes, and before opening any access panels.
1 Make sure the Scrub Deck is in the RAISED position. Make sure the Power Switch (B) is off.
2 Unlatch and swing open the Scrub Deck Side Doors (15).
3 See Figure 2. Remove both Side Blade Assemblies (AA). NOTE: The blades are held in place by a large Knob (BB). Loosen these knobs and slide the
Blade Assemblies (AA) forward slightly and then off of the Scrub Deck.
4a To manually install the brushes:
Lift the Brushes (DD) (or pad holders) and align the lugs on the brush with the holes on the mounting plate then turn to lock in place (turn the outside edge of
brush towards the front of machine as shown by arrow (EE)).
4b To use the automatic Brush Install feature:
i. Press the Guide Bar (CC) forward while sliding the brush under the deck and stop when the brush is contacting both legs of the guide bar. Repeat this
step for the brush on the other side of the deck. NOTE: Do not push the fi rst brush out of position with the second brush.
ii. Turn the machine ON at the Power Switch (B). (SCRUB SYSTEM MUST BE OFF and MACHINE IN NEUTRAL)
CAUTION!
Keep hands and feed out from underneath the deck. Take precautions to prevent hair, jewelry, or loose clothing from
becoming caught in moving parts.
iii. Press the Brush Install Switch (O) the display will show Brush Install Indicator (C18) then wait for the brush install sequence to fi nish.
5 Reinstall the side blade assemblies and close the deck side doors. NOTE: While scrubbing the brushes rotate as shown by arrow (FF).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Nilfisk SC6000 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Nilfisk SC6000 in the language / languages: English as an attachment in your email.
The manual is 29.64 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
