Manual Nilfisk IV150 (page 42 of 60) (English, German, Dutch, French)

19480

Zoom out

Zoom in

1/60

INSTRUCTIONS FOR USE

12 32401106(1)2004-04 A

Before each work shift

Check that all warning and danger plates are fixed and

legible. Replace them if they are damaged or incomplete.

Check that the waste container is empty.

Empty it if this is not the case.

Turn the vacuum on and check the filter efficiency, on

gauge “1”.

If the pointer is in the red area, clean the filter or check the

pipes.

Every 200 hours service (monthly)

Check the air tightness of the vacuum. There must be no

leaks.

Check the condition of the suction hose and accessories.

They must not be torn, slit or broken since this would lower

the suction efficiency.

Check that the powering cable has not been damaged,

torn or crushed. If this is the case, it should be immediately

replaced in strict compliance with the instructions.

Check the condition of the primary filter. It must be

undamaged, i.e. there must be no tears, holes or other

damage.

Change the filter if this is the case.

Every 2000 hours service (yearly)

Check the condition of the suction unit.

Have the vacuum completely overhauled by the

manufacturer or by an authorized after-sales service

centre.

How to carry out the required

inspections

The following descriptions will show the user how to carry

out the required inspections.

Replacing the primary filter

When replacing the primary filter, work outdoors if

possible. The old filter must be disposed of in a special

plastic bag.

Loosen the clamp fixing the filter assembly on the

machine.

Remove suction pipe “1” from the lower spigot.

If the filter assembly is very heavy, remove the top cover

of the filter, and lift the filter assembly from the machine by

means of the 2 handles.

Unscrew the clamp that locks the filter on the bearing cage

and remove it from the filter.

Overturn the filter, exposing plastic strip“2”.

Place the filter in a plastic bag “3”, cut the plastic strips and

detach the cage from the filter.

Close the plastic bag containing the filter.

If this is soiled with toxic or dangerous dust, do not throw

it away. Hand it over to the authorities that are authorized

to dispose of such waste.

Replace the primary filter and the absolute filter with

particular care, above all use a P3-type mask.

Obtain a filter with a identical characteristics as the

previously one and proceed in the following way (fig. 17):

– fit the filter catch and retention ring of the old filter on the

new one;

– insert cage “4” and fix it to the filter by means of plastic

strips “2” at the bottom of the filter itself;

– mount the filter rod in the filter shaker system and

tighten the bolt;

– fix the top cover of the filter assembly;

– fit the filter assembly back into the machine;

– fit the suction pipe “1” back into position;

– fix the clamp holding the filter assembly on the

machine.

ATTENTION!

When the vacuum has been used on

materials that are a hazard to the operator’s

health, maintenance staff must wear

suitable personal protection equipment.

ATTENTION!

Filter replacement is an important operation.

The filter must be replaced with one of

identical characteristics, exposed filtering

area and category. Failure to comply with

these regulations could jeopardize the

correct operation of the vacuum.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk IV150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk IV150

Nilfisk IV150 User Manual - Italian, Portuguese, Spanish - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk IV150 Manual

Product: