454224
32
Zoom out
Zoom in
Previous page
1/48
Next page
B-10 / ENGLISH
B-10 - FORM NO. - 56041703 - BA 625, BA 725, BA 825
INSTALLING THE BRUSHES (DISC SYSTEM)
INSTALL THE BRUSHES (CYLINDRICAL SYSTEM)
CAUTION!
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1 Make sure the Brush Deck is in the RAISED position.
Make sure the Key Switch (A) is off (O).
2 See Figure 3. To access the brushes loosen the
black knobs (one on each side) on top of the idler
assemblies (24) and remove the idler assemblies.
Slide the brush into the housing, lift slightly, push and
turn until it seats. Re-install the idler assemblies.
CAUTION!
Turn the key switch off (O) and remove the key,
before changing the brushes, and before
opening any access panels.
1 Make sure the Brush Deck (7) is in the RAISED
position. Make sure the Key Switch (A) is off (O).
2 If using pads, install the pads on the pad holders.
3 See Figure 2. To mount the Brushes (AA) (or
pad holders) align the Lugs (BB) on the brush
with the holes on the mounting plate and turn
to lock in place (turn the outside edge of brush
towards the rear of machine as shown (CC)).
FIGURE 2
revised 1/07
FIGURE 3
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk BA 825 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk BA 825 in the language / languages: English, Turkish as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info