609446
73
Zoom out
Zoom in
Previous page
1/100
Next page
INSTRUCTIONS FOR USE ENGLISH
9097054000 - SCRUBTEC 545B / 545BL / 553B / 553BL / BOOST 5
23
02/2007
05/2015
CHEMICAL MIXING SYSTEM CLEANING
(For machines with Chemical Mixing System)
Clean the system as follows:
1. Drive the machine to the appointed disposal area.
2. Open the cover (22) and check that the recovery water tank (21) is empty, otherwise empty it with the drain hose (16).
3. Close the cover (22).
4. Carefully lift the tank (40).
5. Unscrew the plug (46) and disconnect the hose (50) from the canister (45).
6. Remove the tank.
7. Wash the tank in the appointed disposal area.
8. Install the canister (45) and connect the hose (50).
9. Turn on the Chemical Mixing System by running the system with clean water only.
NOTE
It is advisable to clean the Chemical Mixing System when it is really dirty/clogged, and if the machine has not been used/
cleaned for a long time.
FUSE CHECK/REPLACEMENT
1. Disconnect the battery connector (12).
2. Move aside the recovery water drain hose (16).
3. Remove the battery charger cable (I, Fig. 8), if equipped, from the cable holder (J).
4. Remove the screws (A) and carefully move aside the panel (B) by disengaging the grommet (K) from its housing on the panel
(B).
5. Check/replace the following fuses:
a) Brush deck fuse F1: (40 A)
b) Vacuum system fuse F2: (30 A)
c) Drive system fuse F3: (30 A) (*)
d) Signal circuits fuse F4: (3 A)
e) Brush release fuse F5: (20 A)
f) Pump fuse F6: (3 A)
(*) Only for SCRUBTEC 545BL, 553BL and BOOST 5
6. Perform steps 1 to 4 in the reverse order.
F
G
H
A
A
A
B
A
J
I
D
K
E
C
P100110
Figure 8
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC 545B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC 545B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info