787629
7
Zoom out
Zoom in
Previous page
1/14
Next page
7
4.0 Maintenance EN 6.0 Recycling the washer
7.0 Questions and an swers
Why do I have to use an atomizer for some de ter -
gents?
Some detergents (except from soaps) must be
applied undiluted. For that purpose an atomizer or
maybe a brush is unique.
Why must the high pressure washer be stored in a
frost free room?
The machine may contain water which, when freez-
ing, may damage vital parts.
How do I store my high pressure washer in the best
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply. Always detach the
high pressure hose (only PRO 130/150/160) and
coil it up with out bending it.
May I use an ordinary detergent in my high pres-
sure washer?
No. You may damage the cleaner and achieve a bad
result. The detergents of Nilfi sk-ALTO have been
specially developed for use with a high pressure
washer and ensures a correct dosage and a quick
effect.
Can I do anything special to keep my high pres sure
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
5.0 Storage EN
The machine should be stored in a frost-free
room!
Pump, hose and accessories should al ways be
emptied of water prior to storing as fol lows:
1. Stop the machine (rotary switch (2) in pos. O)
and de tach water hose and ac ces so ry.
2. Restart the machine and activate the trig ger.
Let the machine run until no more water runs
through the spray gun.
3. Stop the machine and unplug. Wind the elec-
tric cable round the hooks placed on the side
of the machine.
4. Separate spray gun and high pressure hose.
5. PRO 130/150/160: Detach high pres sure hose,
coil it up and place it on the hose storage.
PRO 130/150/160 X-TRA: Coil the high pres-
sure hose up on the hose reel.
6. Place spray gun, nozzles and other ac ces -
so ries in the holders of the machine.
Should the machine by mistake be frozen, it will
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
WARNING! Always disconnect the plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
Wash out water hose, high pressure hose, spray
lance and accessories before mounting.
Clean the couplings of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a lower water
volume This is why clean ing is re quired immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning nee dle (10).
IMPORTANT: The needle should only be used
when the spray lance is detached!
3. Flush the spray lance backwards with wa ter.
4.2 Cleaning of water inlet fi lter
Clean the water inlet fi lter regularly once a month or
more frequently according to use.
1. Detach water inlet hose and coupling (4).
2. Pull out the fi lter and rinse it carefully.
3. Check that it is intact before re-mount ing it.
Make the old cleaner unusable immedi-
ately.
1. Unplug the cleaner and cut the electric
cable.
Do not discard electrical appliances with
household waste.
As specifi ed in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
recycled ecologically.
Contact your local authorities or your nearest dealer
for further information.
Downloaded from www.Manualslib.com manuals search engine
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO P 160.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO P 160.1 in the language / languages: English, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO P 160.1

Nilfisk-ALTO P 160.1 User Manual - German - 12 pages

Nilfisk-ALTO P 160.1 User Manual - German - 12 pages

Nilfisk-ALTO P 160.1 User Manual - Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info