604471
8
Zoom out
Zoom in
Previous page
1/39
Next page
14 15
En
Fr
Pt
Es
En
Fr
Pt
Es
Measurement
Caution — use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
1. Preparing
Install a battery in the battery chamber. (See "Changing Battery")
2. Diopter adjustment
Adjust diopter to obtain a clear LCD indication in the viewfinder.
First, rotate the diopter adjustment ring counterclockwise until it comes to a complete
stop. Next, press the POWER ON/Measurement button to turn on the power
(Confirm the
internal display is on)
. While looking through the eyepiece, rotate the diopter adjustment
ring clockwise until the LCD comes into focus.
If you rotate the ring too much, rotate it counterclockwise substantially then adjust it again.
If the diopter is not adjusted to correspond to your eyesight, you may not be able to
correctly aim at your subject.
3. Measuring
Before measuring, be sure to confirm each mode (Measurement display mode/Target
priority mode/Distance display unit) setting.
*
Please refer to each section on how to set each mode.
1. Turn on the power (Confirm
the internal display is on).
2. Aim at the target.
Position the target at the center
of the reticle.
Immediately after power-on
(Initializing)
Stand-by Target aiming
(Automatic power shut-off after
approx. 8 sec. unattended.)
Single measurement
Continuous measurement function
3. Press the
POWER ON/
Measurement button once to
start single measurement.
4. After measurement, the "measured distance" or "fail to measure" indicator
is displayed for approx. 8 seconds, then power turns off. If you press the
POWER ON/Measurement
button during power-on (while the internal
display is on), another single measurement starts.
3. Press and hold the
POWER ON/Measurement button to start continuous
measurement for approx. 8 seconds. The internal display shows
"measured distance" and "fail to measure" indicator alternately.
*
The laser irradiation mark blinks during the measurement.
*
If you release your finger from the button, continuous measurement
stops.
4. After continuous measurement, the results of final
measurement (measured distance) is displayed for approx.
8 seconds, then power turns off.
If you press the
POWER ON/Measurement
button during
power-on (while the internal display is on), another
measurement starts.
Measuring
"Failure to measure" or "Unable
to measure" distance
Displays the measured figure
"Failure to measure" or
"Unable to measure"
distance
Displays the
measured figure
(Target 1)
Displays the
measured figure
(Target 2)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon PROSTAFF 3i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon PROSTAFF 3i in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon PROSTAFF 3i

Nikon PROSTAFF 3i User Manual - German, Dutch, Danish, Italian, Polish, Swedish, Norwegian, Finnish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info