604471
7
Zoom out
Zoom in
Previous page
1/39
Next page
12 13
En
Fr
Pt
Es
En
Fr
Pt
Es
Target priority mode
This laser rangefinder employs the First Target Priority/Distant
Target Priority switching system (Factory default setting is
Distant Target Priority mode).
1. Turn on the power (Confirm the internal display is on).
2. Press and hold the MODE button, then depress and hold
the POWER ON/Measurement button within 0.5 second.
Continue to press and hold both buttons (more than
2 seconds) until First Target Priority mode and Distant
Target Priority mode are switched.
3. Release both buttons when the mode is switched.
*
If the buttons are not pressed in the correct order,
switching will not take place.
*
If switching fails to take place, repeat Step 2.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects, First Target Priority
mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest
subject.
First Target Priority mode
Distant Target Priority mode
Distance display units
Meter [ ]Yard
[ ]
Measurement results are displayed in yards/meters.
(Factory default setting is yard.)
1. Turn on the power (Confirm the internal display is
on).
2. Press and hold the MODE button for more than two
seconds. When the display unit has been switched,
release the button.
3. After the unit is set, results will be converted and
displayed in the selected distance display unit.
Changing battery
Type of battery: 3V CR2 lithium battery x1
Battery remaining amount indicators
* Battery condition mark in the internal display warns when the battery needs to be replaced.
1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its
rubber packing for water resistance.
2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber. The [+] pole
should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the Nikon
Laser Rangefinder will not operate. When replacing the battery, take the old battery out first. Then insert
a new one.
3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the
rubber packing for water resistance, but continue to turn it all the way until it stops. Confirm that the
cover is securely closed.
Battery life
Continuous operation: Approx. 10,000 times (at approx. 20°C)
This figure may differ according to conditions, temperature, and other factors such as target shape, color, etc.
Use only as a guide.
* The battery supplied with this Laser Rangefinder is for operation checking. Due to natural electrical discharge, the life of this
battery will likely be shorter than that noted above.
* If water enters the battery chamber due to submersion, dry the battery chamber well, then replace the battery.
Internal indications Battery power
After power on, displays for 2 seconds only. Sucient power available.
After power on, displays for 2 seconds only. Power getting low.
Prepare to replace the battery.
Displayed continuously. Low.
Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically powers
o.
Power exhausted.
Replace the battery.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon PROSTAFF 3i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon PROSTAFF 3i in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon PROSTAFF 3i

Nikon PROSTAFF 3i User Manual - German, Dutch, Danish, Italian, Polish, Swedish, Norwegian, Finnish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info