619230

Niko 390-40011 Manual

39
Zoom out
Zoom in
Previous page
1/60
Next page
360-45010
390-40011
39
Single-pole switch 170-01100
Youy can connect an energy-saving switch (loadshedding --> see ‘4.2 ADJUSTMENT’) to the daylight
control module in order to only switch on the lighting at a lower level of daylight.
4-fold push button with feedback LEDs 170-40100
For evry application (see 4.4), you can connect a 4-fold push button with feedback LEDs. Only 2 of
the 4 push buttons with feedback are used, because the module can only switch the lighting:
- Auto (with feedback): The system goes to automatic mode, the lighting is daylight controlled
according to the settings of the application.
- I/O (with feedback): ‘on-off’. The system is set to manual mode. You can switch the lighting on
or off by pressing the push button. If the lighting is switched on, it is NOT daylight controlled,
but is switched on in all areas.
3.4 Applications
The daylight control module is provided with a number of preprogrammed applications as a standard
(fig.3) For how to select an application, see ‘Quickguide’.
Application 00.01 (fabric setting):
Automatic on/off via motion sensor (fig.4a)
If the motion sensor detects movement, the 3-channel on/off daylight control module is activated.
The light is controlled in 3 channels in accordance with the set parameters. If the min. daylight
level for a channel (zone) is reached, the light is switched off. If the motion sensor(s) do not detect
movement, the light automatically switches off after a preset time. For use in e.g. corridors, halls
(factory setting).
Application 01.01:
On/off via time switch 420-00200 + 1XX-78200 (fig.4b)
The 3-channel on/off daylight control module is switched on and off via an external time switch. The
light is controlled in 3 channels in accordance with the set parameters. If the min. daylight level for
a channel (zone) is reached, the light is switched off. For use in e.g. exhibition premises
EN
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niko 390-40011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niko 390-40011 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info