619230
38
Zoom out
Zoom in
Previous page
1/60
Next page
360-45010
390-40011
38
Wiring diagram (fig.2)
- Connect the light sensor (350-10011) and motion sensor (350-20010/350-20011) to terminal
range A. You can connect several motion sensors (max. 8) in parallel. You can only connect one
light sensor per system.
- Connect the manual controls to terminal range B.
- Connect the RJ12-inputs of the Power Pack and the daylight control module via 390-40011.
Startup
The light sensor (350-10011) has to be placed and connected correctly before switching on the
mains supply. Proceed as follows:
- Switch on the mains supply.
- Confirm the sensor value on the display.
- The module is powering up.
- The module is ready for use.
If the daylight control module has already been switched on before the light sensor was placed and
connected correctly, you can repeat the initiation of the sensor (see ‘4.2. ADJUSTMENT>adjust settings’).
3. OPERATION AND USE
3.1 Light sensor (350-10011) (fig.2)
The lighting is switched on if the sensor measured insufficient daylight.
3.2 Motion sensor (350-20010/350-20011) (fig.2)
The motion sensor(s), max. 8 in parallel, enable the lighting to be switched on in case motion is detected.
3.3 Manual control (fig.2)
Push button 170-00000
Depending on the application (see 3.4), you can connect a manual push button to switch the
lighting on and off.
Time switch 420-00200 + 1XX-78200
Depending on the application (see 3.4), you can connect a time switch in order to switch the
lighting on and off.
EN
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niko 390-40011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niko 390-40011 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info