619222

Niko 350-20110 Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
350-20110 / 350-20111 / 390-20110
21
Green potentiometer: setting the ultrasonic sensitivity (US). The ultrasonic
sensor makes the motion sensor extremely sensitive for small movements
(2–3cm). Turn the potentiometer clockwise to increase the sensitivity.
Recommended (fabric) setting: 50%.
d) Setting the switch off time (black potentiometer)
Min. 8min – max. 40min
Turn the potentiometer clockwise to increase the switch off delay. In
manual mode, the sensor operates according to the set switch off delay.
In automatic mode, the sensor increases the switch off delay during the
training period and minimizes the delay afterwards to make the time during
which te lighting is switched on as short as possible.
Recommended (fabric) setting: 25%.
e) Setting the switch off delay (timer) in test mode (8s)
1. Turn the black key to set the timer to max. (100%).
2. Turn the key to min. (0%).
3. The timer is set to 8s test mode for 1h, then automatically returns to 8min.
4. In order to manually exit the 8s test mode, turn clockwise to just above
8min.
DS Function Off On
A1 Auto / Manually Automatic
The 3 sensor outputs operate automatically.
Manual
-Blue output (movement) gives a continuous signal,
the lighting is switched on continuously.
-Grey output (movement + light) operates automatically.
- Potentialfree contact operates automatically.
A2 Threshold value Auto threshold adjustment
During the training period, the sensor learns
when the detection has to be less or more
sensitive in order to switch on the lighting.
High sensitivity
The sensor has a high degree of sensitivity to switch
on the lighting.
A3 LED indication LED indication on LED indication off
A4 Restart training period Saving the information Erase all and restart training period
(on: 5s – off)
B1 Strong air current compensation Compensation off Compensation on
If the sensor is placed too close to an air current (e.g.
airco), he can mistakenly be activated. If the air current
compensation is activated, the sensor is less sensitive.
B2 Doorway
Installation above doorway?
No Yes
Extra sensitivity right below the sensor.
B3 Switch off delay Automatic adjustment
During the training period, the sensor learns to
optimize the switch off delay, so the time during
which the lighting is switch ON can be minimized.
Use manual settings
The sensor operates according to the set switch off delay
(black potentiometer).
B4 Sensitivity Automatic adjustment
During the training period, the sensor learns
when the detection has to be less or more
sensitive in order to switch on the lighting.
This in order to optimize the operation.
Use manual settings
The sensor operates according to the set sensitivity
(green + red potentiomete
EN
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niko 350-20110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niko 350-20110 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info