641172
8
Zoom out
Zoom in
Previous page
1/139
Next page
-d-
Do not install the encoder near any heat sources such as
radiators, heat registers, stoves, and/or other equipment,
that produce heat. Attentive concern and exercise of care
by installing the encoder away from any heat sources is
vital to the safety of the person or persons using the
product. Installing the encoder near such heat sources
could result in personal injury or death to you and/or
others.
Never insert objects of any kind into the encoder through
any encoder openings, as the objects may touch
dangerous voltage points, short out parts, and result in a
risk of fire or electrical shock.
Do not stack the encoder on top of or below other
electronic devices as this can cause heat build-up and
vibration of the encoder. These conditions can damage
the encoder thus voiding the limited warranty.
Do not install the encoder in any area where the
temperature is less than 5°C or more than 40°C. Transfer
from temperature extremes may cause condensation. Let
it sit unplugged at room temperature for at least 45
minutes before plugging it in.
Do not block any ventilation openings to the encoder.
Improper ventilation may be hazardous. Blocking
ventilation openings could result in overheating of the
encoder, which, in turn, may cause fire or electric shock,
which may cause damage to the encoder and/or personal
physical injury or death to you and/or others. Install the
encoder in strict accordance with the manufacturer’s
instructions, carefully following any and all steps set
forth in the instructions in order to avoid physical injury
or death to you and/or others.
Do not place the encoder in an enclosure such as a
cabinet without proper ventilation. Improper ventilation
may be hazardous to your health and safety and the
health and safety of others.
Fully unplug the encoder during lightning storms, or
other dangerous weather that might produce lightning, or
when the encoder is unused for long periods of time.
To reduce the risk of fire or electric shock, do not expose
the encoder to rain or moisture of any kind. Exposing the
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara Pro - Streaming Media Encoder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara Pro - Streaming Media Encoder in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info