641187
128
Zoom out
Zoom in
Previous page
1/150
Next page
Appendix A: H.264 Advanced Settings
122 ViewCast
Baseline profile is for video conferencing and mobile applications and has the lowest demands on CPU
load and memory usage, but the lowest resulting quality. Main profile is for standard-definition TV,
while high profile is best for HD video.
Note: You can use each profile for any resolution video with expected increases in video encode
quality and corresponding impacts to CPU and memory. Finally, you may use additional
changes to the Advanced Encoder Settings to further refine the video encoding.
Settings
Setting
Explanation
BFramesMax
This value sets the maximum number of concurrent B-frames
you can use. More B-frames improve video quality but also
increase CPU load, in some cases considerably. Only Main or
High Profile support B-frames. Changing this value when
Baseline Profile is selected has no effect.
GOPSize
This value sets the maximum interval between IDR (also called
reference) frames. Theoretically, higher values improve
compression because I-frames have more data but it can also
increase the appearance of fluctuating quality because more
P- or B-frames (partial) are used. If you see “pulsing” or
“strobing” in the encoded video, this value may be too low.
GOPSizeMin
This value sets the minimum length between IDR (reference)
frames. This setting limits the minimum length after each I-
frame before another can be placed. The suggested default is
1 x the frame rate.
InLoopDeblockingFilterAlpha
This value affects the overall amount of deblocking applied to
the video. Higher values remove blocky appearance more
efficiently, but retain less detail causing the image to appear
softened. This value is the most important parameter in
determining the overall sharpness of your encode. To make a
low bit rate encode look smoother, set this to a positive
number. The default value is 0 and should be sufficient to
eliminate most blocking. In general, values lower than -3 and
higher than 3 are usually not used, but could be if so desired.
InLoopDeblockingFilterBeta
This value determines whether something in a block is a detail
or not when deblocking is applied to it. Lower values apply less
deblocking to more flat blocks with detail present and more
deblocking to blocks without detail. Higher values cause more
deblocking to be applied to less flat blocks with details
present. Raising the value of Beta deblocking is a good way to
get rid of ringing artifacts by applying more aggressive filtering
to blocks that are not very flat. Lowering the value of Beta
deblocking is a good way to reduce the amount of DCT blocks
without blurring the entire picture. Again, the default value of
0 usually is good enough. Set this to a positive number to
smooth out low bit rate video encodes. In general, values
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara 2200 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara 2200

Niagara 2200 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info