555356
59
Zoom out
Zoom in
Previous page
1/90
Next page
Chapter 7 Ethernet Ports
NI 17xx Smart Camera User Manual 7-4 ni.com
to the DHCP server, the smart camera does not appear in MAX or
Vision Builder AI. The IP address must to be reconfigured before you
can use the smart camera.
Firewall Considerations
If you are having difficulty detecting the system and setting up the NI Smart
Camera on your network, you must configure the firewall to open the
TCP/UDP ports used by the smart camera and the host machine. The smart
camera uses the ports listed in Table 7-2.
Subnet Considerations
To configure the NI Smart Camera, it must reside on the same subnet as the
development computer. If you want to use the smart camera on a subnet
other than the one the development computer is on, first connect and
configure the smart camera on the same subnet as the host computer.
The first time you configure the smart camera, you must also install
software on it. After configuring the smart camera, use DHCP to assign an
IP address or reassign a static IP address for the subnet where you want the
smart camera to reside, then physically move the smart camera to the other
subnet. Refer to Getting Started with the NI 17xx Smart Camera for more
information about configuring the smart camera.
Contact your network administrator if you need assistance configuring the
host computer and smart camera on the same subnet.
Table 7-2. TCP/UDP Ports Used by the NI Smart Camera
Port Type Details
3580 TCP/UDP Reserved as nati-svrloc (NAT-ServiceLocator). Used by Measurement
& Automation Explorer (MAX) to locate remote targets.
7749 TCP Used for remote image display (not reserved).
7750 TCP Used for NI-IMAQ remote configuration (not reserved).
3363 TCP/UDP Reserved as nati-vi-server (NATI VI Server). Used by Vision Builder
for Automated Inspection to configure a remote NI Smart Camera.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NI Vision NI 17xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NI Vision NI 17xx in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info