555356
58
Zoom out
Zoom in
Previous page
1/90
Next page
Chapter 7 Ethernet Ports
© National Instruments Corporation 7-3 NI 17xx Smart Camera User Manual
DHCP and Static IP Address Assignment
You must configure the IP settings for the NI Smart Camera prior to use.
You can assign a static IP address or, if your network has a DHCP server,
you can use a DHCP server to assign an IP address. If you do not know
whether you should assign a static IP address or use a DHCP server to
assign an IP address, assign a static IP address or contact your network
administrator.
DCHP IP address assignment is only available for port 1. Static IP address
assignment is available on both ports.
For information about assigning an IP address to the smart camera, refer to
Getting Started with the NI 17xx Smart Camera.
The advantage of using a DHCP server to assign an IP address is that the
DHCP server manages the IP addresses of the network. You do not need to
know the IP address of the smart camera. Also, the DHCP server does not
allow other devices to use the IP address that is already assigned to your
smart camera.
Although using a DHCP server makes configuring an IP address easy,
configuring a static IP address can be more reliable. Consider the following
potential issues before using a DHCP server to assign an IP address to the
smart camera:
If the network has both static IP addresses and IP addresses managed
by a DHCP server, the DHCP server must be configured to not use
reserved static IP addresses. If the DHCP server is not configured this
way, the DHCP server can assign a reserved IP address to another
device, causing address conflicts on the network, which results in some
devices being unreachable.
When a smart camera configured for DHCP starts, it must be able
to connect to the DHCP server. If a smart camera was previously
configured to use a DHCP server and the smart camera cannot connect
Table 7-1. SPEED LED Behavior
SPEED LED Behavior Indication
Off No link or a 10 Mbps link is negotiated
Solid Green A 100 Mbps link is negotiated
Solid Amber A 1,000 Mbps link is negotiated
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NI Vision NI 17xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NI Vision NI 17xx in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info