698620
37
Zoom out
Zoom in
Previous page
1/46
Next page
DASH CAM SETTINGS (CONTD.)DASH CAM SETTINGS (CONTD.)
Video menu continued:
3. Parking Mode
There is only one method of using parking Mode, which is by using a ‘Permanent Live’.
This means that there is always 12Vdc being supplied to the Dash Cam. This can either by
using a 12Vdc outlet that does not power off when the vehicles ignition is turned off or by using
the Nextbase Hardwire Kit which has been installed using a permanent live fuse location.
Once Parking Mode has been turned on, the Dash Cam will enter standby mode when there is
no physical movement detected for a 5 minute period.
Should physical movement of the vehicle be detected, the Dash Cam will power on and start
recording a 1 minute protected video and then will continue to record normally until there is no
physical movement detected for a 5 minute period.
4. G Sensor
Turn off or adjust the sensitivity of the built in G Sensor. The G Sensor detects forces which
will automatically protect the current recording in event of a collision.
Note:
- This does not affect Parking mode sensitivity.
Options: High, Medium, Low and Off
Default Setting: Medium
37
37


Need help? Post your question in this forum.

Forumrules
1

Forum

nextbase-300w

Reset search

  • I am having problems setting up my nextbase 300w dash am Submitted on 24-5-2021 at 13:45

    Reply Report abuse
  • I cannot get my nextbase 300w dash cam to connect, I have followed all the instructions but whet I posted the password 12345678 it came up as incorrect password , what am I doing wrong ? It’s all very confusing and the instructions are not very good! My phone is an iphone Submitted on 24-5-2021 at 13:43

    Reply Report abuse
  • Hi
    I have installed the 300W and formatted tge card, but during a journey the red protect button came on and an alarm sounded, which ironically could cause an accident itself as it was quite a distraction. What does this light and alarm indicate please? Submitted on 20-5-2021 at 14:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nextbase 300W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nextbase 300W in the language / languages: English as an attachment in your email.

The manual is 6,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info