698620
8
Zoom out
Zoom in
Previous page
1/46
Next page
PARTS & CONTROLS (CONTD.)
Back:
4. Power & Record button
Power:
Press and hold the button for 2 seconds to turn on and off the Dash Cam.
Record:
Press to start or stop a recording.
5. Protect Recording & Format SD Card button
Protect Recording:
Press the protect button whilst recording to protect the current recording, the button will
illuminate, red in colour indicating the file is protected.
Depending on at which point during the current recording the file is protected, the Dash Cam
will also save the previous or subsequent recordings, as follows:-
If the protection takes place during the first 3rd of the recording, the previous recording will
also be protected.
If the protection takes place during the final 3rd of a recording, the next recording will also be
protected.
Note:
- A marker will be seen on the recorded file, noting when the protection took place.
Format SD Card:
Press and hold for 5 seconds until the yellow LED begins to flash.
Note:
- For stable performance, it is recommended that you format the memory card every
2-3 weeks. Of course, you should only do this AFTER you've downloaded any files from
the card that you may want to keep.
87
3 6
5
4
8
8


Need help? Post your question in this forum.

Forumrules
1

Forum

nextbase-300w

Reset search

  • I am having problems setting up my nextbase 300w dash am Submitted on 24-5-2021 at 13:45

    Reply Report abuse
  • I cannot get my nextbase 300w dash cam to connect, I have followed all the instructions but whet I posted the password 12345678 it came up as incorrect password , what am I doing wrong ? It’s all very confusing and the instructions are not very good! My phone is an iphone Submitted on 24-5-2021 at 13:43

    Reply Report abuse
  • Hi
    I have installed the 300W and formatted tge card, but during a journey the red protect button came on and an alarm sounded, which ironically could cause an accident itself as it was quite a distraction. What does this light and alarm indicate please? Submitted on 20-5-2021 at 14:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nextbase 300W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nextbase 300W in the language / languages: English as an attachment in your email.

The manual is 6,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info