552651
23
Zoom out
Zoom in
Previous page
1/47
Next page
21
----- Using the VNC Menu
One of the unique features of this product is the VNC menu system. Whenever you see a
window with a dark blue background and grey edges, this window has been inserted into
the VNC datastream so that it is effectively laid over the existing video. These menus allow
you to control the many features of the KVM without using the Web interface or a custom
client.
The commands you send through this interface (i.e. restart) will be sent to the
managed computer currently active on the NewStar Digital KVM via IP. It is
advisable to verify which managed computer is active before
making any changes.
We strongly recommend you thoroughly familiarize yourself with the information
here and in the next section (“Accessing KVM Features”) before undertaking any
critical tasks through the VNC interface.
Welcome Window
When you initially connect to the system, a window similar to this one will be shown.
This tells you which system you are controlling, what encryption algorithm was used and
what key strength is currently in effect. Click anywhere inside the window to clear it, or wait
ten seconds.
Bribar Feature
Along the bottom of the VNC screen is a dark blue bar with various buttons. We call this
feature “the Bribar”. Its purpose is to show a number of critical status values and to
provide shortcuts to commonly used features.
Here is a snapshot of what it may look like. There will be slight differences based on
optional features and system configuration. Starting from the left side of the Bribar, each
feature and its function is outlined below.
Bandwidth: Indicates current average bandwidth coming out of the NewStar
Digital KVM via IP. The second number measures round trip time (RTT) of the
connection when it was first established.
Resync: Re-aligns the remote and local mouse points so they are on top of each
other.
Redraw: Redraws the entire screen contents; occurs immediately.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info