Manual Newstar NS-841HDI (page 12 of 47) (English)

552651

Zoom out

Zoom in

1/47

NOTE: You can choose to mix managed computers connected via PS/2 and USB

connections as necessary with no impact on features or functionality.

NOTE: Steps 5 and 6 are necessary only if you wish to have the ability to manage the

KVM and its computers locally (i.e. not over the Internet or LAN). While not

required, adding these devices is highly recommended for ease of administration.

NOTE: The KVM also has the ability to “cascade” multiple KVMs to increase the total

number of possible managed computers. If you wish to take advantage of this

feature, refer to the section “Cascade Configuration” in this manual.

Disabling Mouse Acceleration on the Managed Computers

Many operating systems offer a feature called mouse acceleration that allows the user to

adjust the responsiveness of the cursor on the screen to physical movements of the mouse.

While this is usually a beneficial interface enhancement, it can interfere with the operation

of the unit and should be disabled on the managed computers before

a remote session is

attempted. Follow the instructions below to disable mouse acceleration for the operating

system installed on each managed computer.

Windows 98 and Windows 2000

1. From the Control Panel, click on Mouse.

2. From Mouse Properties, click on Motion tab.

3. Make sure the Pointer speed bar is centered and Acceleration is set to None.

Windows XP and Windows Server 2003

1. From the Control Panel, click on Mouse.

2. Go to “Pointer Options “ and turn off “Enhance Pointer Precision.”

3. Make sure that the Pointer speed bar is centered.

Linux, Unix and X-Windows

1. Add this command to your xinitrc, xsession or other startup script:

xset m 0/0 0

----- Network Configuration Methods Explained

The NewStar Digital KVM via IP offers two distinct methods for configuring the unit for

your network. The method that will work best for you will depend on your level of

experience and your specific network configuration.

Web Configuration Using DHCP

This method requires that your network implement DHCP (Dynamic Host Configuration

Protocol), usually on a server or network access device such as a router that dynamically

allows devices to join the network without pre-configuration. It also assumes that you will

have easy access to your network’s DHCP log, since you will need to know the IP address

of the unit to complete the configuration over your Web browser. (If you are unsure of how

to access your network’s DHCP log, contact your System Administrator for details.) If the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Newstar NS-841HDI Manual

Product: