17889

Newpol XR2001NF Manual

28
Zoom out
Zoom in
Previous page
1/44
Next page
I
28 504
GB
7
1A 1B 1C
S5
S4
S6
9
8
USO DELLO SCOMPARTO CONGELATORE
USING THE FREEZER COMPARTMENT
1) Starting and regulating the freezer
This compartment can also work independently. To switch on the freezer,
press the “FREEZER” button for at least one second (fig. 8)
To stop the freezer, press the “FREEZER” button for 4 seconds. The display
will indicate (- -) (fig. 8).
WARNING:
When the freezer is switched off, the entire appliance is also
switched off.
While the product is in operation, the temperature value inside the freezer is
displayed on the display (see S6, fig. 9). The display indicates the internal
temperature values between +20°C and -40°C. Temperatures higher than
+20°C are indicated by the letter “H”.
The temperature can be programmed between -18°C and -24°C.
- Programming and controlling the temperature: press the
“FREEZER” button. The programmed temperature will flash for 6 sec-
onds. Re-press the button to set the required temperature (each time the
button is pressed, the temperature will reduce by 1 degree to -24°C,
after which the display will restart from -18°C).
- Checking the programmed temperature: press the “FREEZER”
button once, the programmed temperature (S6) will continue to flash for
6 seconds.
The programmed functions will remain in the memory even during a
power cut or when the appliance is disconnected from the mains supply.
1) Messa in funzione e regolazione dello scomparto congelatore
Questo scomparto può funzionare anche autonomamente, per mettere in
funzione il congelatore, premere il tasto “CONGELATORE” per almeno un
secondo (fig. 8).
Per interrompere il funzionamento, premere per 4 secondi il tasto “CON-
GELATORE”. Il display indica (- -) (fig. 8).
ATTENZIONE:
Allo spegnimento del congelatore si avrà lo spegnimento di
tutta l’apparecchiatura .
Durante il funzionamento, la temperatura interna del congelatore è indicata
sul display (vedere S6, fig. 9). Il display indica i valori della temperatura
interna compresi tra +20°C e -40°C. I valori di temperatura superiori a
+20°C sono contrassegnati dalla lettera “H”.
La temperatura è programmabile tra -18°C e -24°C.
- Programmazione e regolazione della temperatura: premendo una vol-
ta il tasto “CONGELATORE”, la temperatura programmata lampeggia per
6 secondi. Premendo di nuovo, si imposta la temperatura desiderata (ad
ogni pressione, la temperatura diminuisce di 1 grado fino a -24°C,
dopodiché il display riparte da –18°C).
- Controllo della temperatura programmata: premendo una volta il tasto
“CONGELATORE”, la temperatura programmata (S6) continua a lam-
peggiare sul display per 6 secondi. Le funzioni programmate restano in
memoria anche in mancanza di corrente o quando l’apparecchio è
scollegato.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newpol XR2001NF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newpol XR2001NF in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info